Categories
Salient features
- One touch and quick joint of indoor electrical wires.
- Applicable wire size : Copper/Solid wire φ1.6mm・φ2.0mm
- Insulation maximum operating temperature：120℃
- Rated：20A/300V
- Part number: NPJ P01-3P, NPJ B01-3P, NPJ B02-3P, NPJ 3PV-S
Note
- Material:
Plug Connector・Terminal Block：
Polycarbonate (Flame retardance UL94V-0)
VCTF-COVER：Polypropylene (transparent)
UNTI-DUST COVER：Silicon
CONTACT：Tin plated copper alloy
Connectors
Salient features
- Classification: NICHIFU, NICHIFU connector, NCF connector, NICHIFU cos, quick connector
- QLX for solid copper wire. Translucent housing enables visual inspection of inserted wires.
- QL MC for 0.9～1.2mm diameter solid copper wire.
- QL SQ is a high temperature connector mainly for fire-detectors.
- Part number:
Note
Material : Stainless Steel
Connector contact : Oxygen free copper (Tin plated)
Housing : Polycarbonate (UL94V2)
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, ROMEX, CABLE SUPPORTER,
- Distributed wire suspension system prevents the danger of temperature rise and deterioration of cable insulation.
- Snap onto the suspension bolt with ease.
- Prevent temperature rise of wires and also deterioration of wire insulation. Easy fit on the suspension bolt
Note
MATERIAL Polypropylene（UL94V-0）
INSULATOR TEMPERATURE -15℃〜 75℃
INSTALLATION TEMP 0℃〜 40℃
SUSPENSION BOLT W 3/8 bolt
APPLIANCE ELECTRICAL WIRING
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, terminal, environmental, insulated
- No toxic material in the insulation. Environmentally conscious terminal
- Series: TMDEN, TMDN, TMDV, TMEDN, TMEDV, TMENBT, TMENTC, TMEXBT, TMEXTC, TMNB, TMVB, TMVP, TMXBP.
Note
- UL, C-UL standard
- Excellent for insulation with Rated Voltage of 600V
- Temperature range:-40℃〜125℃
- Its polycarbonate material will not generate poisonous
- halogenic gas and/or corrosive gas when combusted.
- RoHS SOC10 Compliant.
- 2 Standard colors available for each size:
1.25mm2(red & clear)・2mm2(blue & clear)・5.5mm2(yellow & clear)
Salient features
- Classification: NICHIFU, NCF, BUTT CONNECTOR, HEAT SHRINK, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR
- It has the heat shrink tube over the butt connector.
- Use a heat gun, the glue inside the tube will melt, then an air tight water/dust proof connection.
Note
RATED VOLTAGE : AC600V
INSULATOR TEMPERATURE : 105℃
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, Closed end connector,
- For multiple wire connections to or from Fire Detector.
- Durable for 15 minutes at max. 380℃.
Note
RATED VOLTAGE 300V
INSTALLATION TEMP：0 〜 40℃
INSULATOR TEMPERATURE：-40 〜 75℃
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, TERMINAL, HIGH TEMPERATURE
- Solid nickel, allows wire connection under circumstance at temperature max. 400℃.
Note
Material : Nikel for 400℃ max
Same tools used for Copper Terminals & Sleeves although endurance is low with high temperature terminals.
APPLIANCE ELECTRICAL WIRING
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, TERMINAL, PIN TERMINAL, INSULATED
- Nylon housing covers the disconnect for fully insulation.
Note
MATERIAL ： Oxygen free copper tube.
(electro-tin-plated)
INSULATOR：NYLON , PVC
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, wire ends
- Makes stranded wire to single to be fittable to push-on terminal block or switch. Wider entry type for two wires also available.
Note
MATERIAL ： Oxygen free copper tube.
(electro-tin-plated)
INSULATOR：NYLON
RATED VOLTAGE ： 300V
INSULATOR TEMPERATURE ： -40℃〜 +105℃
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, connectors, water tight, WP-TYPE
- No heat shrink tube needed. Silicon-bushing inside connector shut off water. Water-Proof Safety Code IP57 proven.
Note
- Rated voltage 300V
- Flame retardance UL94V-2 Insulator temperature − 40℃〜＋ 105℃
- Protection IP57（IEC529）
Connectors
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, connector, clamp connector, cover.
- Cable connection with branch. Various wire combinations are available upto total wire size of 700sq. mm. Specially designed insulation available for individual size.
- Clamp connectors tend to be highly resistant to oxidation and corrosion and are designed to seal the connection between flexible cords and metal enclosures. Manufactured using high quality copper materials.
- Part number: T7~T700 & Clamp Connector Cover T70C~T700C
Note
Applicable tool : NOP-120, NOH-360, NP-520
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, connector, compression
- Available for wire upto 1600mm2
- Compression connectors are typically larger in size to be used in high voltage power control applications. These connectors are compressed onto a conductor using hydraulic compression tools or dies.
- Part number:
C1-14 ~ C1-60
C2-14 ~ C2-500
C4-100 ~ C4-500
C6-600 ~ C6-1000
C1-14C ~C1-60C
C2-14C ~ C2-500C
C4-100C ~ C4-500C
C6-600C ~ C6-1000C
C6-1200A-SN ~ C6-1600A-SN
Note
Conductive face is tin lead plated.
Do not use wires such as KIP, MLFC, LH, PNCT and PDP in JIS