Categories
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, FILTER
- [Minimal Pressure Loss Part1] Minimal pressure loss is realized by adopting a pleated structure element with a large filtration area.
- [Minimal Pressure Loss Part2] Minimal pressure loss through reduced clogging is achieved by using borosilicate media (with hydro- and oleophobic properties).
- [Pop-up indicator] A 360° high-visibility indicator, enabling differential pressure checking from all directions, is equipped as standard. (P/M types)
- [Easy element replacement] The push-fit element makes mounting easy.
Note
- This is a mainline filter that pursues energy savings, low pressure loss, and long life. The adoption of a 360-degree high visibility indicator helps to grasp the maintenance period and reduce the number of element replacement steps.
- [Applicable compressor] 15kW to 120 kW
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, REFRIGERATION AIR DRYER, XEROAQUA, GX3200D・GX5200D
- [Energy saving] The compact design reduces power consumption. A low air loss drain discharger has been adopted.
- [SUS heat exchanger] Oil-free stainless steel heat exchanger is used for all models. Prevents dust generation from heat exchange. The refrigerant pipes (copper pipes) within the heat exchanger are nickel plated for improved corrosion resistance.
- [Easy maintenance] The safe design allows the operation state to be confirmed at a glance. Easily service the unit even while it is running. [Space saving] (GX5255D / GX5275D) Top surface exhaust and drain trap installation can be selected for left or right, and can be installed flush against walls.
Note
- Air dryer with outstanding environmental properties, reliability and safety. Adopts the new refrigerant R-134a / R-407C / easy maintenance is possible.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, ABSODEX, AX7000X
- The basic functions are the same as AX9000T / AX9000TH.
- Supports three types of interface: Parallel I/O (NPN), CC-Link, and DeviceNet.
Note
- All actuators use absolute type position detectors.
The driver and actuator can be used in combination.
It is a product that can be used in a wide range of applications such as assembly.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, τDISC
- [System support tool] The enhanced adjustment, monitoring, operation, analysis, and editing functions assist in mechanical system matching and enable efficient start-up.
- [Servo driver] VPH Series : Developed exclusively for direct drives. Maximizes the motor performance. Supports five types of interface: I/O, SSCNETⅢ/H, CC-Link, EtherCAT, MECHATROLINK-Ⅲ.
- [Direct drive motor] Compact design. Ideal for converting the AC servo motor + reducer mechanism into a direct drive system. Index drive, tightening drive, Rotary drive, Feeding and winding drive, and Table drive etc.
Note
- Standard type suitable for various applications.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, FILTER, MOTOR DRIVE, EBS-M, EBS-G
- [More Space Saving of Equipment] Since the motor is built into the actuator, there are no projections or folds in the motor assembly. Therefore, space saving of equipment is possible.
- [Flexible Production] Unlike pneumatic cylinders, electric actuators can perform multipoint positioning anywhere. As one actuator can handle the production of various types of products, this contributes to space savings.
- [Expanded Options] The compact design is possible due to the dimensional compatibility with the pneumatic cylinder LCR Series. In addition, since soft starts and soft stops are possible, shock absorbers are not required.
Note
- The table type electric actuator has a a short stroke and is ideal for transporting and position
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, MOTOR DRIVE, SERVO
- [Flexible combinations] Simply by combining standard products, we have constructed an orthogonal transport system suitable for any transport situation. It can be freely combined from single-axis to 4 axis.
- [Applicable to a wide range of transport applications] Supports transport from light load to high loads. Max. load capacity 250 kg. (Horizontal)
- [Long stroke length] Long stroke length compatible. Maximum stroke length 4450 mm (timing belt drive)
- [Controller] Just connect the single-axis controller with the link cable to create a multi-axis controller. High tact, simultaneous control up to 4 axes and complicated sealing work are also possible.
Note
- Electric actuator compatible with single and multi-axis servo motor drive.
- Combine the components freely for compatibility with any transport situation.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, MOTORLESS
- [Space-saving] A wide guide, “Outer Rail,” is used to support the load. In combination, the proper design of the slider part simultaneously achieves compact and high rigidity, and contributes to space.
- [Each Motor can be installed] A bracket is provided that matches the 12 servo motors and the three stepping motors. Combined with your own motors, it is available under familiar control. Each field network is supported.
- [Reduced installation time] The product can be installed directly from the top or bottom, without removing the cover. This significantly reduces work time, especially when installing from the top.
- [Low Dust Specification Option] Provides cleanness with class 2.5 equivalent (ISO14644-1 standards). Low dust generation is achieved by providing a vacuum port. Ideal for transport in clean environments. * For details on clean rating, refer to the catalog on pages for dust generation characteristics.
- [Easy Maintenance] A grease feed port capable of directly feeding grease from the outside is installed on the side of the slider. To maintain a guide and a ball screw by feeding fat from one place without disassembling a body.
Note
- [NEW] Added Low Dust Specification Option
- [NEW] Added Motor Manufacturer for Support
- A motorless specification of an electric actuator that allows you to install and control motors from each manufacturer.
- The Outer Rail System, which unifies the body and the guide, is compact and highly rigid. It has a grease supply port on the outside of the main body and is easy to install and maintain by enabling the top of the main body to be mounted.
- strokes: 50~1250mm
- Maximum portable mass (horizontal): 110kg
- Maximum speed: 1600mm/s
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, MOVER, ELECTRIC SHUTTLE MOVER
- [Space saving] 2D operation is realized without using multi-axis or gantry robots.
- Contributes to space saving with effective use of space. Supports long strokes of up to 20 m, inconceivable for conventional electric actuators.
- [Smooth operation realized] The servo motor drive enables freely adjustable setting of multipoint positioning speed. Smooth start / stop is realized.
- [Applicable to motors from all manufacturers] Mount a motor you're familiar with. Brackets compatible with all manufacturers' motors are available.
Note
- Transport system that enables single-axis 2D transport with one motor.
- Long stroke of up to 20 m. Multipoint positioning / Soft start & stop possible.
- This is a motorless specification.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, INLINE OXYGEN MONITOR, PNA-FP2
- 【Pressure-resistant structure for inline use】 Unlike conventional products, the PNA can be used under pressure from 1 atm. Up to 1.0 MPa. without the need for gas purging.
- 【Modular Structure】 Maintenance is easy with space-saving piping.
- 【Switchable oxygen/inert gas concentration display】 100 – Inert gas concentrations can be known at a glance through the oxygen concentration.
- 【Secure food manufacturing process FP Series compliant】 The FP Series can be Safely and Securely used in food manufacturing processes
Note
- This unique product can measure oxygen concentrations while under pressure. Since it can be connected inline to the nitrogen extraction system, the oxygen concentration can be measured continuously. It is optimal for grasping the abnormality of the system and the timing of the maintenance.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, NITROGEN, GAS EXTRACTION, NS・NSU
- [Improved flexibility in installation and design] Horizontal installation is now available. Improved ease of use, including installation in dead space and being built into equipment.
- [Expanded concentration range] The nitrogen concentration range is now available from 90%. It is easy to use for low nitrogen-containing applications.
- [Easy purification] Easily purifies nitrogen gas without using a cylinder or large equipment. Generates a nitrogen-enriched gas by utilizing a hollow fiber separation membrane that easily transmits oxygen.
- [More compact and convenient through 3 reductions] Reduced piping: Long piping work is unnecessary since it can be installed near equipment. Reduced processes / space: We propose the optimum system according to the required flow rate. Contributes to reduced procedures and space.
- [Easy maintenance] The cylinder does not need remaining amount management, replacement, or refilling. The only required maintenance cost is electricity for the air compressor. Component replacement is possible without disassembling the piping.
Note
- It easily separates and purifies the high-purity nitrogen necessary for oxidation-proof and explosion-proof applications from compressed air.
Horizontal installation is now available with the added flexibility in installation. Furthermore, a wide range of nitrogen concentration is available from 90% to 99.9%. The optimum model is selected from the 17 flow rates and 25 model lineup, and the nitrogen supply state can be constantly monitored with an inline oxygen sensor and flow meter.