- Classification: TE products, AMP products, TE connectors, TE Vietnam
- These types of connector systems are mounted or processed to a printed circuit board (PCB). Our broad portfolio of signal and power interconnects include a wide variety of high-density, high-speed board-to-board, cable-to-board, or cable-to-cable connectors designed for automated assembly. These connectors provide exceptional performance in both low-voltage differential signaling (LVDS) and embedded DisplayPort (eDP) applications. Our PCB receptacles enable wire-to-PCB terminations; our PCB taps provide power to the PCB. Our Flexible Printed Cable (FPC) is suitable for when small centerline spacing makes larger wire-to-board interconnects impractical.
Related products
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, Closed end connector,
- For multiple wire connections to or from Fire Detector.
- Durable for 15 minutes at max. 380℃.
Note
RATED VOLTAGE 300V
INSTALLATION TEMP：0 〜 40℃
INSULATOR TEMPERATURE：-40 〜 75℃
Connectors
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, TERMINAL, PIN TERMINAL, INSULATED
- Nylon housing covers the disconnect for fully insulation.
Note
MATERIAL ： Oxygen free copper tube.
(electro-tin-plated)
INSULATOR：NYLON , PVC
Salient features
- Classification: NICHIFU, NCF, pin terminal, NICHIFU pin terminal,
- The Pin stuck out center of terminal barrel to fit smoothly in narrower terminal block. Insulation cap (UL94V-0) for each Pin terminal are available.
- Voltage : 600V/20A
- Non-insulated Pin terminal & Non-insulation VC CAP: TC type
Note
- Environmentally friendly insulated terminals: TMEX TC Type
Salient features
- Classification: TE products, AMP products, TE connectors, TE Vietnam, Rectangular Connectors TE.
- This type of device is engineered to optimize signal integrity in applications with limited internal space. Manufactured in materials ranging from molded plastics to die-cast alloys, our rectangular connector housings are engineered for reliable wire-to-wire and wire-to-board connections. Our portfolio offers different ratings and sizes, with or without locking features. Vertical headers are available with optional polarization pegs and drain holes and offer a blind mate version. Right angle headers offer optional screw mount flanges.
Note
Grace Inertia connectors mate to simultaneously complete the circuit and lock the connector. There are four keying methods and colors available in the 3.3mm, 3.5mm, 6.0mm, 6.2mm, 6.5mm, 7.92mm, 9.0mm, and 12.4mm centerline options. These small wire-to-wire and wire-to-board connectors are used for a wide range of large electrical products such as home appliances, transportation solutions, air conditioners, vending machines, industrial controls, and HVAC systems.
Connectors
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, terminal, environmental, insulated
- No toxic material in the insulation. Environmentally conscious terminal
- Series: TMDEN, TMDN, TMDV, TMEDN, TMEDV, TMENBT, TMENTC, TMEXBT, TMEXTC, TMNB, TMVB, TMVP, TMXBP.
Note
- UL, C-UL standard
- Excellent for insulation with Rated Voltage of 600V
- Temperature range:-40℃〜125℃
- Its polycarbonate material will not generate poisonous
- halogenic gas and/or corrosive gas when combusted.
- RoHS SOC10 Compliant.
- 2 Standard colors available for each size:
1.25mm2(red & clear)・2mm2(blue & clear)・5.5mm2(yellow & clear)
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, connector, compression
- Available for wire upto 1600mm2
- Compression connectors are typically larger in size to be used in high voltage power control applications. These connectors are compressed onto a conductor using hydraulic compression tools or dies.
- Part number:
C1-14 ~ C1-60
C2-14 ~ C2-500
C4-100 ~ C4-500
C6-600 ~ C6-1000
C1-14C ~C1-60C
C2-14C ~ C2-500C
C4-100C ~ C4-500C
C6-600C ~ C6-1000C
C6-1200A-SN ~ C6-1600A-SN
Note
Conductive face is tin lead plated.
Do not use wires such as KIP, MLFC, LH, PNCT and PDP in JIS
Connectors
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, connector, clamp connector, cover.
- Cable connection with branch. Various wire combinations are available upto total wire size of 700sq. mm. Specially designed insulation available for individual size.
- Clamp connectors tend to be highly resistant to oxidation and corrosion and are designed to seal the connection between flexible cords and metal enclosures. Manufactured using high quality copper materials.
- Part number: T7~T700 & Clamp Connector Cover T70C~T700C
Note
Applicable tool : NOP-120, NOH-360, NP-520
Salient features
The D-5000, which has the largest connector size in the dynamic series, is being developed with the aim of becoming a dedicated power connector for industrial equipment.
As with the D-3000 series, a newly developed copper alloy is used for the contacts to support high power, achieving 30A per pole.
The pin arrangement is 10.16 mm (400 mil), which allows a large pattern to be taken in consideration of the high current of the board type.
In addition, a high current α series has been added. Supports up to 45A per pole.
Note
