Power Systems Connectors

Connector Mounting Type
Board Mount
Bulkhead
Bus Bar Mount
Cable Mount (Free-Hanging)
DIN Rail
Fixing Screw
Motor
Panel Mount

Categories: , ,

Electrical Power connectors are used to join electrical conductors and thus repair or extend a power network. They also can be used for grounding to protect the grid, the assets and ultimately people. TE’s electrical connectors are available for low, medium and high voltage electrical conductors, bared or insulated. They come in a variety of different materials and are suitable for a wide range of applications such as underground, overhead, substation and grounding. Our range of electrical connectors have been engineered to the highest standards of quality and design, exhibiting properties such as corrosion resistance, insulation, material strength, durability, flexibility, and more.

Related products

Categories

Splices

Salient features
Whether you need to splice 30 AWG solid copper magnet wire or 4/0 stranded aluminum wire, our broad range of splices allow you to splice solid or stranded wire – with copper, aluminum, or a combination of both. We offer crimp, insulation displacement connection (IDC), and other wire splicing types technology, which you can apply manually or with semi- or fully-automated equipment. Engineered for reliability, our electrical wire splices provide you with a cost-effective solution for when you need to make millions of splices or a few repair splices.
Note

Splice Product Type
Accessory
Cable Joint
Cable Splice
Coaxial Cable Splice Kit
Contact
Wire Splice
Wire Terminator v.v

Connectors

1. Page 1 2. Page 2 3. Page 3 4. Page 4

COMPRESSION TERMINALS_NICHIFU

Salient features
  • Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, connector, compression
  • Available for wire upto 1600mm2
  • Compression connectors are typically larger in size to be used in high voltage power control applications. These connectors are compressed onto a conductor using hydraulic compression tools or dies.
  • Part number:

C1-14 ~ C1-60

C2-14 ~ C2-500

C4-100 ~ C4-500

C6-600 ~ C6-1000

C1-14C ~C1-60C

C2-14C ~ C2-500C

C4-100C ~ C4-500C

C6-600C ~ C6-1000C

C6-1200A-SN ~ C6-1600A-SN

Note

Conductive face is tin lead plated.
Do not use wires such as KIP, MLFC, LH, PNCT and PDP in JIS

Connectors

D3000series

Salient features
A series that forms the core of the dynamic series and is being developed with the aim of “for signals” and “for power supplies” of industrial equipment. There are two types of pin arrangements, a standard 3.81 mm (150 mil) pitch and a high voltage type 5.08 mm (200 mil) pitch. The former is mainly for signal circuits and low voltage power supply circuits, and the latter is for high voltage power supply circuits. It is a specification for. Especially for power supplies, in order to meet the demand for small size and high power due to the recent miniaturization of equipment, a newly developed copper alloy is used, and it is designed to allow a large current of 15A per pole to flow even though it is small.
Note

Connectors

1. TMEX Series_Page 1 2. TMEX Series_Page 2 3. TMEX Series_Page 3 4. TMDEN Series 5. TMDV Series 6. TMEN Series 7. TMENBT Series 8. TGVB & TMVB & TMDVB Series 9. TGVP & TMVP Series 10. TMEDN & TMDEN & TMDV Series 11. TMEDV Series__Page 2 12. TMEDV Series_Page 1 13. TGNB & TMNB & TMX BP Series

INSULATED TERMINALS & CONNECTORS_NICHIFU DISTRIBUTOR

Salient features
  • Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, terminal, environmental, insulated
  • No toxic material in the insulation. Environmentally conscious terminal
  • Series: TMDEN, TMDN, TMDV, TMEDN, TMEDV, TMENBT, TMENTC, TMEXBT, TMEXTC, TMNB, TMVB, TMVP, TMXBP.
Note
  • UL, C-UL standard
  • Excellent for insulation with Rated Voltage of 600V
  • Temperature range:-40℃〜125℃
  • Its polycarbonate material will not generate poisonous
  • halogenic gas and/or corrosive gas when combusted.
  • RoHS SOC10 Compliant.
  • 2 Standard colors available for each size:
    1.25mm2(red & clear)・2mm2(blue & clear)・5.5mm2(yellow & clear)

Connectors

1. Sleeve B-TYPE 2. Sleeve P-TYPE

EXTRA LONG BUTTS_NICHIFU

Salient features
  • Classificaiton: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, extra long butts, sleeve.
  • Less distortion on Butt when crimped one side.
  • Easy and smooth installation.
  • Part number: B-type & P-type

Note

JIS, UL, CSA
NA 3, NA10, NA 20 air crimping tool.
NOH 300K (Head) requires hydraulic pump

Connectors

Ring Terminals & Spade Terminals

Salient features
Ring terminals and spade lugs for reliable electrical connections Ring terminals – known as lug terminals – are electrical terminals that join wiring to a stud or screw connection. On one end, ring terminals are equipped with a closed or open crimp barrel to make an electrical connection with the wire. On the other end is a ring-shaped tongue installed on equipment by a bolt or screw that goes through the ring. Spade terminals – known as spade lugs – join or disconnect a single wire that is connected to a screw or stud. Its shape, which resembles a fork or spade, allows the user to easily connect or disconnect the electrical connection. Spade terminals can help you to connect electrical wires quickly, because screws and bolts only require loosening – instead of complete disassembly – when attaching or removing a connection.
Note

Terminal & Splice Type
Flag Tongue
Hook Tongue
Lancelok
Multiple Stud
Offset Ring Tongue
Rectangular Tongue
Ring Tongue
Shur Plug
Slotted Ring Tongue
Spade Flange Tongue
Spade Tongue
Spark Plug
Splice
Spring Spade

Connectors

D7000series

Salient features
Achieves high current and high reliability of up to 65A In order to support high current of 65A, a crown band with a multi-point contact mechanism is used for the first time in the lycee contact. Corresponding to protection class IP20 Finger protection of protection class IP20 is realized by attaching a new concept cap to the tip of the pin contact on the header side. Ideal for safety measures in the power supply section of industrial equipment such as semiconductor manufacturing equipment, large control equipment, and machine tools. Also supports sequential connection Two types of pin contacts, standard type and long type, are available. It also supports applications that require sequential connection from the ground pin.
Note

Connectors

Terminals_PANDUIT DISTRIBUTOR

Salient features
  • Classification: PANDUIT, PANDUIT DISTRIBUTOR, PANDUIT DISTRIBUTORS, PANDUIT VIETNAM, TERMINALS, CONNECTOR, TERMINAL PANDUIT
  • All Panduit terminals feature high-quality materials made with electrolytic copper for high conductivity and tin-plated for corrosion resistance.
  • Some types of terminals
  • Disconnects
  • Ferrules
  • Fork Terminals
  • Pin Terminals
  • Terminal Applicators
  • Wire Joints
  • Ring Terminals,…
Note
  • Material: Heat-Shrink, Polypropylene, Copper,Brass (70% Cu 30% Z), Iron Copper, Plating (Sn, Ni)
  • Insulation Material: Vinyl, Nylon, Premium, Nylon Kynar
  • Standards Met : UL 486 A/B – E52164, RoHS, IEEEE