Related products
Connectors
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, terminal, environmental, insulated
- No toxic material in the insulation. Environmentally conscious terminal
- Series: TMDEN, TMDN, TMDV, TMEDN, TMEDV, TMENBT, TMENTC, TMEXBT, TMEXTC, TMNB, TMVB, TMVP, TMXBP.
Note
- UL, C-UL standard
- Excellent for insulation with Rated Voltage of 600V
- Temperature range:-40℃〜125℃
- Its polycarbonate material will not generate poisonous
- halogenic gas and/or corrosive gas when combusted.
- RoHS SOC10 Compliant.
- 2 Standard colors available for each size:
1.25mm2(red & clear)・2mm2(blue & clear)・5.5mm2(yellow & clear)
Salient features
A series that forms the core of the dynamic series and is being developed with the aim of “for signals” and “for power supplies” of industrial equipment.
There are two types of pin arrangements, a standard 3.81 mm (150 mil) pitch and a high voltage type 5.08 mm (200 mil) pitch. The former is mainly for signal circuits and low voltage power supply circuits, and the latter is for high voltage power supply circuits. It is a specification for.
Especially for power supplies, in order to meet the demand for small size and high power due to the recent miniaturization of equipment, a newly developed copper alloy is used, and it is designed to allow a large current of 15A per pole to flow even though it is small.
Note

Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, connector, compression
- Available for wire upto 1600mm2
- Compression connectors are typically larger in size to be used in high voltage power control applications. These connectors are compressed onto a conductor using hydraulic compression tools or dies.
- Part number:
C1-14 ~ C1-60
C2-14 ~ C2-500
C4-100 ~ C4-500
C6-600 ~ C6-1000
C1-14C ~C1-60C
C2-14C ~ C2-500C
C4-100C ~ C4-500C
C6-600C ~ C6-1000C
C6-1200A-SN ~ C6-1600A-SN
Note
Conductive face is tin lead plated.
Do not use wires such as KIP, MLFC, LH, PNCT and PDP in JIS
Salient features
A larger number of contacts can be mounted compared to a square connector of the same area.
Robust housing made of heat-resistant and autolytic thermoplastic resin enables use in harsh environments
Positive lock function ensures mating
Correspondence to environmentally hazardous substances: RoHS, REACH compliant
specification
Note
The following safety standards are approved for each model number. Please contact us for approval for each model number.
Please note that it may differ from the TE Connectivity performance specifications.
Salient features
- One touch and quick joint of indoor electrical wires.
- Applicable wire size : Copper/Solid wire φ1.6mm・φ2.0mm
- Insulation maximum operating temperature:120℃
- Rated:20A/300V
- Part number: NPJ P01-3P, NPJ B01-3P, NPJ B02-3P, NPJ 3PV-S
Note
- Material:
Plug Connector・Terminal Block:
Polycarbonate (Flame retardance UL94V-0)
VCTF-COVER:Polypropylene (transparent)
UNTI-DUST COVER:Silicon
CONTACT:Tin plated copper alloy
Salient features
A connector for industrial equipment that is ideal for 20A power lines. We provide the optimum size for the small size and large current required by equipment.
The contact is a new design with 4-point contacts that increases the number of contacts and secures Hertz stress.
While ensuring a current value of 50% or more compared to the Dynamic 3000 series, the mating height has been increased by about 14%, achieving miniaturization.
The current capacity per unit volume is also increased by about 32% compared to existing products.
A 20A connector that inherits the concept of the popular Dynamic Series as a whole. (20A is guaranteed when used in 3P.)
Note

Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, connectors, water tight, WP-TYPE
- No heat shrink tube needed. Silicon-bushing inside connector shut off water. Water-Proof Safety Code IP57 proven.
Note
- Rated voltage 300V
- Flame retardance UL94V-2 Insulator temperature − 40℃〜+ 105℃
- Protection IP57(IEC529)

Salient features
Achieves high current and high reliability of up to 65A In order to support high current of 65A, a crown band with a multi-point contact mechanism is used for the first time in the lycee contact.
Corresponding to protection class IP20 Finger protection of protection class IP20 is realized by attaching a new concept cap to the tip of the pin contact on the header side.
Ideal for safety measures in the power supply section of industrial equipment such as semiconductor manufacturing equipment, large control equipment, and machine tools.
Also supports sequential connection Two types of pin contacts, standard type and long type, are available.
It also supports applications that require sequential connection from the ground pin.
Note




