Insulation Cap
Related products
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, TERMINAL, HIGH TEMPERATURE
- Solid nickel, allows wire connection under circumstance at temperature max. 400℃.
Note
Material : Nikel for 400℃ max
Same tools used for Copper Terminals & Sleeves although endurance is low with high temperature terminals.
Salient features
A connector that is compact in the dynamic series but has achieved specifications for industrial equipment.
It can be used mainly for signal applications.
It has an appropriate pitch of 2.5 mm for signal lines of 250 V or less, and is compatible with AWG # 18 wires at this pitch. (1 pole maximum 5A)
In addition, it has various features such as a center lock method that enables effective use of the board and a contact lance for low profile rolls.
Note
Salient features
The D-5000, which has the largest connector size in the dynamic series, is being developed with the aim of becoming a dedicated power connector for industrial equipment.
As with the D-3000 series, a newly developed copper alloy is used for the contacts to support high power, achieving 30A per pole.
The pin arrangement is 10.16 mm (400 mil), which allows a large pattern to be taken in consideration of the high current of the board type.
In addition, a high current α series has been added. Supports up to 45A per pole.
Note
Salient features
- One touch and quick joint of indoor electrical wires.
- Applicable wire size : Copper/Solid wire φ1.6mm・φ2.0mm
- Insulation maximum operating temperature：120℃
- Rated：20A/300V
- Part number: NPJ P01-3P, NPJ B01-3P, NPJ B02-3P, NPJ 3PV-S
Note
- Material:
Plug Connector・Terminal Block：
Polycarbonate (Flame retardance UL94V-0)
VCTF-COVER：Polypropylene (transparent)
UNTI-DUST COVER：Silicon
CONTACT：Tin plated copper alloy
Connectors
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, terminal, environmental, insulated
- No toxic material in the insulation. Environmentally conscious terminal
- Series: TMDEN, TMDN, TMDV, TMEDN, TMEDV, TMENBT, TMENTC, TMEXBT, TMEXTC, TMNB, TMVB, TMVP, TMXBP.
Note
- UL, C-UL standard
- Excellent for insulation with Rated Voltage of 600V
- Temperature range:-40℃〜125℃
- Its polycarbonate material will not generate poisonous
- halogenic gas and/or corrosive gas when combusted.
- RoHS SOC10 Compliant.
- 2 Standard colors available for each size:
1.25mm2(red & clear)・2mm2(blue & clear)・5.5mm2(yellow & clear)
Salient features
A series that forms the core of the dynamic series and is being developed with the aim of “for signals” and “for power supplies” of industrial equipment.
There are two types of pin arrangements, a standard 3.81 mm (150 mil) pitch and a high voltage type 5.08 mm (200 mil) pitch. The former is mainly for signal circuits and low voltage power supply circuits, and the latter is for high voltage power supply circuits. It is a specification for.
Especially for power supplies, in order to meet the demand for small size and high power due to the recent miniaturization of equipment, a newly developed copper alloy is used, and it is designed to allow a large current of 15A per pole to flow even though it is small.
Note
Salient features
Achieves reliable wire-to-wire connection without tools
High contact reliability for FA environment
Compatible with a wide variety of applications, including sensors
Contributes to prevention of erroneous wiring with 4 types of housing colors according to the outer shape of the wire coating
Prevents semi-fitting by clarifying the lock sound during mating
High connection quality that does not depend on the number of twisted wires or the coating material
Note
Product standard: 108-5765
Part Numbers: X1746741-X
Connectors
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, connector, clamp connector, cover.
- Cable connection with branch. Various wire combinations are available upto total wire size of 700sq. mm. Specially designed insulation available for individual size.
- Clamp connectors tend to be highly resistant to oxidation and corrosion and are designed to seal the connection between flexible cords and metal enclosures. Manufactured using high quality copper materials.
- Part number: T7~T700 & Clamp Connector Cover T70C~T700C
Note
Applicable tool : NOP-120, NOH-360, NP-520