Ring Terminals
Related products
Salient features
A connector that is compact in the dynamic series but has achieved specifications for industrial equipment.
It can be used mainly for signal applications.
It has an appropriate pitch of 2.5 mm for signal lines of 250 V or less, and is compatible with AWG # 18 wires at this pitch. (1 pole maximum 5A)
In addition, it has various features such as a center lock method that enables effective use of the board and a contact lance for low profile rolls.
Note
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, wire ends
- Makes stranded wire to single to be fittable to push-on terminal block or switch. Wider entry type for two wires also available.
Note
MATERIAL ： Oxygen free copper tube.
(electro-tin-plated)
INSULATOR：NYLON
RATED VOLTAGE ： 300V
INSULATOR TEMPERATURE ： -40℃〜 +105℃
Salient features
Ring terminals and spade lugs for reliable electrical connections
Ring terminals – known as lug terminals – are electrical terminals that join wiring to a stud or screw connection. On one end, ring terminals are equipped with a closed or open crimp barrel to make an electrical connection with the wire. On the other end is a ring-shaped tongue installed on equipment by a bolt or screw that goes through the ring. Spade terminals – known as spade lugs – join or disconnect a single wire that is connected to a screw or stud. Its shape, which resembles a fork or spade, allows the user to easily connect or disconnect the electrical connection. Spade terminals can help you to connect electrical wires quickly, because screws and bolts only require loosening – instead of complete disassembly – when attaching or removing a connection.
Note
Terminal & Splice Type
Flag Tongue
Hook Tongue
Lancelok
Multiple Stud
Offset Ring Tongue
Rectangular Tongue
Ring Tongue
Shur Plug
Slotted Ring Tongue
Spade Flange Tongue
Spade Tongue
Spark Plug
Splice
Spring Spade
Salient features
The D-5000, which has the largest connector size in the dynamic series, is being developed with the aim of becoming a dedicated power connector for industrial equipment.
As with the D-3000 series, a newly developed copper alloy is used for the contacts to support high power, achieving 30A per pole.
The pin arrangement is 10.16 mm (400 mil), which allows a large pattern to be taken in consideration of the high current of the board type.
In addition, a high current α series has been added. Supports up to 45A per pole.
Note
Connectors
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, terminal, environmental, insulated
- No toxic material in the insulation. Environmentally conscious terminal
- Series: TMDEN, TMDN, TMDV, TMEDN, TMEDV, TMENBT, TMENTC, TMEXBT, TMEXTC, TMNB, TMVB, TMVP, TMXBP.
Note
- UL, C-UL standard
- Excellent for insulation with Rated Voltage of 600V
- Temperature range:-40℃〜125℃
- Its polycarbonate material will not generate poisonous
- halogenic gas and/or corrosive gas when combusted.
- RoHS SOC10 Compliant.
- 2 Standard colors available for each size:
1.25mm2(red & clear)・2mm2(blue & clear)・5.5mm2(yellow & clear)
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, TERMINAL, HIGH TEMPERATURE
- Solid nickel, allows wire connection under circumstance at temperature max. 400℃.
Note
Material : Nikel for 400℃ max
Same tools used for Copper Terminals & Sleeves although endurance is low with high temperature terminals.
Salient features
A series that forms the core of the dynamic series and is being developed with the aim of “for signals” and “for power supplies” of industrial equipment.
There are two types of pin arrangements, a standard 3.81 mm (150 mil) pitch and a high voltage type 5.08 mm (200 mil) pitch. The former is mainly for signal circuits and low voltage power supply circuits, and the latter is for high voltage power supply circuits. It is a specification for.
Especially for power supplies, in order to meet the demand for small size and high power due to the recent miniaturization of equipment, a newly developed copper alloy is used, and it is designed to allow a large current of 15A per pole to flow even though it is small.
Note
Connectors
Salient features
- Classification: NICHIFU, NICHIFU connector, NCF connector, NICHIFU cos, quick connector
- QLX for solid copper wire. Translucent housing enables visual inspection of inserted wires.
- QL MC for 0.9～1.2mm diameter solid copper wire.
- QL SQ is a high temperature connector mainly for fire-detectors.
- Part number:
Note
Material : Stainless Steel
Connector contact : Oxygen free copper (Tin plated)
Housing : Polycarbonate (UL94V2)