Insulation Cap
Related products
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, wire ends
- Makes stranded wire to single to be fittable to push-on terminal block or switch. Wider entry type for two wires also available.
Note
MATERIAL ： Oxygen free copper tube.
(electro-tin-plated)
INSULATOR：NYLON
RATED VOLTAGE ： 300V
INSULATOR TEMPERATURE ： -40℃〜 +105℃
Salient features
- Classification: PANDUIT, PANDUIT DISTRIBUTOR, PANDUIT DISTRIBUTORS, PANDUIT VIETNAM, TERMINALS, CONNECTOR, TERMINAL PANDUIT
- All Panduit terminals feature high-quality materials made with electrolytic copper for high conductivity and tin-plated for corrosion resistance.
- Some types of terminals
- Disconnects
- Ferrules
- Fork Terminals
- Pin Terminals
- Terminal Applicators
- Wire Joints
- Ring Terminals,…
Note
- Material: Heat-Shrink, Polypropylene, Copper,Brass (70% Cu 30% Z), Iron Copper, Plating (Sn, Ni)
- Insulation Material: Vinyl, Nylon, Premium, Nylon Kynar
- Standards Met : UL 486 A/B – E52164, RoHS, IEEEE
Connectors
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, terminal, environmental, insulated
- No toxic material in the insulation. Environmentally conscious terminal
- Series: TMDEN, TMDN, TMDV, TMEDN, TMEDV, TMENBT, TMENTC, TMEXBT, TMEXTC, TMNB, TMVB, TMVP, TMXBP.
Note
- UL, C-UL standard
- Excellent for insulation with Rated Voltage of 600V
- Temperature range:-40℃〜125℃
- Its polycarbonate material will not generate poisonous
- halogenic gas and/or corrosive gas when combusted.
- RoHS SOC10 Compliant.
- 2 Standard colors available for each size:
1.25mm2(red & clear)・2mm2(blue & clear)・5.5mm2(yellow & clear)
Salient features
A connector that is compact in the dynamic series but has achieved specifications for industrial equipment.
It can be used mainly for signal applications.
It has an appropriate pitch of 2.5 mm for signal lines of 250 V or less, and is compatible with AWG # 18 wires at this pitch. (1 pole maximum 5A)
In addition, it has various features such as a center lock method that enables effective use of the board and a contact lance for low profile rolls.
Note
Salient features
A connector for industrial equipment that is ideal for 20A power lines. We provide the optimum size for the small size and large current required by equipment.
The contact is a new design with 4-point contacts that increases the number of contacts and secures Hertz stress.
While ensuring a current value of 50% or more compared to the Dynamic 3000 series, the mating height has been increased by about 14%, achieving miniaturization.
The current capacity per unit volume is also increased by about 32% compared to existing products.
A 20A connector that inherits the concept of the popular Dynamic Series as a whole. (20A is guaranteed when used in 3P.)
Note
Salient features
- One touch and quick joint of indoor electrical wires.
- Applicable wire size : Copper/Solid wire φ1.6mm・φ2.0mm
- Insulation maximum operating temperature：120℃
- Rated：20A/300V
- Part number: NPJ P01-3P, NPJ B01-3P, NPJ B02-3P, NPJ 3PV-S
Note
- Material:
Plug Connector・Terminal Block：
Polycarbonate (Flame retardance UL94V-0)
VCTF-COVER：Polypropylene (transparent)
UNTI-DUST COVER：Silicon
CONTACT：Tin plated copper alloy
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, connectors, water tight, WP-TYPE
- No heat shrink tube needed. Silicon-bushing inside connector shut off water. Water-Proof Safety Code IP57 proven.
Note
- Rated voltage 300V
- Flame retardance UL94V-2 Insulator temperature − 40℃〜＋ 105℃
- Protection IP57（IEC529）
Salient features
A larger number of contacts can be mounted compared to a square connector of the same area.
Robust housing made of heat-resistant and autolytic thermoplastic resin enables use in harsh environments
Positive lock function ensures mating
Correspondence to environmentally hazardous substances: RoHS, REACH compliant
specification
Note
The following safety standards are approved for each model number. Please contact us for approval for each model number.
Please note that it may differ from the TE Connectivity performance specifications.