Email

SOLUTIONS

FACTORY SOLUTION

We provide solutions for the Factory. Products as below

PRODUCTS FOR FACTORY SOLUTION

Control Devices/FA Systems

Displacement Sensors / Measurement Sensors

Salient features
These Sensors can be used to measure distances and heights. A wide variety of models is available, including Laser Sensors, LED Sensors, Ultrasonic Sensors, Contact Sensors, Eddy Current Sensors, and more.
Note

High Precision Measurement Sensor
Displacement Sensors for Differentiation
Profile Measuring Sensors
Measurement Sensors
Other Displacement Sensors

Salient features
Safety Sensors detect workers entering hazardous areas and stop machines.
Note

Safety Light Curtains
Safety Multi-Light Beams
Single-beam Safety Sensors

Control Devices/FA Systems

Actuator

Salient features
Actuator products perform pick & place and other motions to support application construction.
Note

Delta robot
R6Y3
Pick and Place Solution. The fastest picking system integrated in the Sysmac platform

Salient features
*Type of mounting: Lateral mounting *Cooling capacity : 280 / 300W ~ 650/800W *Rated volage(50/60Hz): Single phase 200~240VAC *Function: Off-temperature alarm, Detection of abnormal heat dissipation, Detection of temperature sensor disconnection, Maintenance reminder,Forced cooling operation for inspection * Certificates/Approvals : EU RoHS2, CE
Note

* Working temperature : +20 to +50℃ ( Nominal values at 35℃ temperature both inside and outside are indicated in “Rated” and values at 50℃ outside and 35℃ inside are indicated in “Max)
* Temp. setting range: +30 to +45℃ (Initial setting:+35℃) (Use only within the specified temperature range)

Salient features
*Type of mounting: Lateral mounting *Cooling capacity : 250/300W ~ 2600/2900W *Rated volage(50/60Hz): Single phase 200~240VAC * Communication function: RS485 (Modbus / RTU) *Function: Off-temperature alarm, Detection of abnormal heat dissipation, Detection of temperature sensor disconnection, Maintenance reminder, Forced cooling operation for inspection * Certificates/Approvals : EU RoHS2, CE
Note

* Working temperature : +20 to +50℃ ( Nominal values at 35℃ temperature both inside and outside are indicated in “Rated” and values at 50℃ outside and 35℃ inside are indicated in “Max)
* Temp. setting range: +30 to +45℃ (Initial setting:+35℃) (Use only within the specified temperature range)

Salient features
* High collection capability by ionizing mist! * Suitable for both oil and water-soluble mists * Max. air flow :8 / 10m3/min~ 40/45m3/min * Collection efficiency:Min. 99% (by gravimetric method) * Max. oil mist density :300mg3/min * Rated voltage:3-phase, 200 VAC 50/60 Hz * Suction port diameter:Ø148mm~Ø200mm * Certificates/Approvals: EU RoHS
Note

* Working temperature : 0 to +40℃
* Max. suction air temp : +40℃

Salient features
* Super high collection efficiency as Non-Filter! * Eliminates filter replacement and industrial waste * Max. air flow :4.5/5.0m3/min~ 21.5/24.5m3/min * Collection efficiency:Min. 99% Particle diameter 2µm or larger * Rated voltage:3-phase, 200VAC 50Hz/ 200 ‒ 220VAC 60Hz * Suction port diameter:Ø98mm~Ø198mm * Certificates/Approvals: EU RoHS2
Note

* Working temperature : 0 to +40℃
* Max. suction air temp : +80℃

Salient features
・Eliminates fumes generated in soldering or laser marking process Suitable for clean rooms ・Max. air volume: 2.2 m3/min ~3.2m3/min ・Max. static pressure:9.1 kPa~ 9.5kPa ・Collection efficiency: Min. 99.97% (for 0.3μm or larger particles) ・Rated voltage (50/60Hz): Single phase, 100VAC ・Max. intake temperature: +40℃ * Certificates/Approvals: EU RoHS2
Note

* Working temperature : 0 to +40℃
* Max. intake temperature : +40℃

Salient features
・Suctions fine airborne dust with a large volume of air like a vent fan For clean room use ・Max. air volume: 2.9m3/min ~7.0 m3/min ・Max. static pressure: 2.5kPa ~2.9kPa ・Collection efficiency: Min. 99% (for 0.3μm or larger particles) ・Rated voltage (50/60Hz): Single phase, 100VAC ・Max. intake temperature: +40℃ * Certificates/Approvals : EU RoHS
Note

* Working temperature : 0 to +40℃
* Max. intake temperature : +40℃

Salient features
  • The Pin stuck out center of terminal barrel to fit smoothly in narrower terminal block. Insulation cap (UL94V-0) for each Pin terminal are available.
  • Voltage : 600V/20A
Non-insulated Pin terminals, Part Numbers:
  • TC 0.3-9.5, TC 1.25-11, TC 1.25-11S, TC 1.25-16, TC 1.25-16S, TC 1.25-20, TC 1.25-20S, TC 2-11, TC 2-11S, TC 2-16, TC 2-16S, TC 2-20, TC 2-20S, TC 3.5-11S, TC 5.5-11
  • TC 0.75-13.5K-ST, TC 1.25-11S-ST, TC 1.25-11V-ST, TC 1.25-16V-ST, TC 1.25-18S-ST, TC 1.25-20S-ST, TC 2-11V-ST, TC 2-16V-ST, TC 2-18V-ST, TC 5.5-15-ST, TC 5.5-21-ST, TC 8-18-ST
  • TC 8-S-C, TC 8-C, TC 14S-C, TC 14-C, TC 22S-C, TC 22-C, TC 38-C, TC 60-C
  • TC 1.25-13.5V-ST-C, TC 1.25-16V-ST-C, TC 1.25-18S-ST-C, TC 2-13.5V-ST-C, TC 2-16V-ST-C, TC 2-18V-ST-C, TC 5.5-15-ST-C, TC 5.5-21-ST-C, TC 8-18-ST-C, TC 235-16S-C
Non-insulation VC CAP, Part Numbers:
  • VC 8, VC 14, VC 22S, VC 22, VC 38, VC 60
Note

Environmentally friendly insulated terminals.

  • TMEX TC-0.3-9.5, TMEX TC-1.25-11, TMEX TC-1.25-11S, TMEX TC-1.25-16, TMEX TC-1.25-16S, TMEX TC-1.25-20, TMEX TC-1.25-20S, TMEX TC-2-11, TMEX TC-2-11S, TMEX TC-2-16, TMEX TC-2-16S, TMEX TC-2-20, TMEX TC-2-20S, TMEX TC-5.5-11

APPLIANCE ELECTRICAL WIRING

INSULATED CENTER PIN TERMINALS_NICHIFU

Salient features
Makes stranded wire to single to be fittable to push-on terminal block or switch. Wider entry type for two wires also available.  
Note

MATERIAL : Oxygen free copper tube.
(electro-tin-plated)
INSULATOR:NYLON
RATED VOLTAGE : 300V
INSULATOR TEMPERATURE : -40℃〜 +105℃

Salient features
Autonomous Intelligent Vehicles (AIVs) assist with routine, labor intensive material handling tasks
Note

Mobile Robots
LD / HD Series
Autonomous Mobile Robots (AMRs), self-mapping, self-navigating

Salient features
The robot system allows collaborative operation with humans without safety fences
Note

Collaborative Robots
TM Series
Collaborative robot for assembly, packaging, inspection and logistics

Factory

Wire KIV

Salient features
* The product complies with E * Product is ROHS2 compliant *Softer than IV . wire * Size from 0.5 mm2~ * PVC sheath * Maximum working voltage: 600V * Maximum operating temperature: 60℃ * Various colors
Note

* Mainly used for 600V or less electrical equipment and panel wiring, etc.

Factory

VCTF

Salient features
* Japan Standard Core Noise Wire PSE * Size 0.3,0.75,1.25,2,…MM² * PVC sheath * Maximum working voltage: 300V * Maximum operating temperature: 60℃
Note

* Used as a power cord for small electrical appliances of 300V or less for indoor use.

Salient features
■[Cylinder switch grooves provided on four surfaces] (Excluding φ12, 16) A cylinder switch can be mounted on the same surface as the piping port, which improves visibility and maintenance efficiency. ■[End thread options] Rod ends can be selected from two options: female thread (standard) and male thread (option). ■[All bore sizes, T type switch mountable] The T type switch used in many CKD products can be mounted on cylinders of all bore sizes. The use of a unified switch helps to reduce stock quantity.
Note

■Space saving series with a wide range of stroke lengths and switch mounting surface options compared with conventional models.
A widely varied series of space-saving cylinders, suitable for everything from general environments to specific applications.

Salient features
■[Flat cylinder] Piston is flat, with a structure allowing it to receive load. Highly load-resistant, with rotation-stop mechanism also provided. ■[Sealing belt] Seal part is straight, improving sealing performance. ■[High-speed packing] A piston packing for high speed operation has been adopted. ■[Common port] A common port (one-side piping) or standard port (both sides piping) can be selected according to the installation location. Downsizing of equipment realized. ■[Magnet provided as standard] Compatible with switch installation as standard.
Note

■Resistant to high load and durable.
High-speed rodless cylinder Series runs from φ12 to φ100 with a variety of choices.

Salient features
■[F.R.L. combination] Systems are easily upgraded using unified key boundary dimensions and a diverse range of options and variations. ■[Compacting, modularization] Main dimensions (width and depth) of F.R.L. products have been standardized as compact module. Accurate assembly dimensions can be obtained with simple calculations. ■[Long service life element] This element incorporates CKD's original chemical fiber structure (patent pending), which has a rough surface and gradually becomes finer toward the interior. Clogging is greatly reduced, and the element life is greatly extended.
Note

■Compact modular design in which major boundary
dimensions of devices such as filters, regulators, lubricators, etc., are unified.

Salient features
[Flexible combinations] Simply by combining standard products, we have constructed an orthogonal transport system suitable for any transport situation. It can be freely combined from single-axis to 4 axis. [Applicable to a wide range of transport applications] Supports transport from light load to high loads. Max. load capacity 250 kg. (Horizontal) [Long stroke length] Long stroke length compatible. Maximum stroke length 4450 mm (timing belt drive) [Controller] Just connect the single-axis controller with the link cable to create a multi-axis controller. High tact, simultaneous control up to 4 axes and complicated sealing work are also possible.
Note

Electric actuator compatible with single and multi-axis servo motor drive.
Combine the components freely for compati…

Salient features
■[Improved flexibility in installation and design] Horizontal installation is now available. Improved ease of use, including installation in dead space and being built into equipment. ■【Expanded concentration range】 The nitrogen concentration range is now available from 90%. It is easy to use for low nitrogen-containing applications. ■[Easy purification] Easily purifies nitrogen gas without using a cylinder or large equipment. Generates a nitrogen-enriched gas by utilizing a hollow fiber separation membrane that easily transmits oxygen. ■[More compact and convenient through 3 reductions] Reduced piping: Long piping work is unnecessary since it can be installed near equipment. Reduced processes / space: We propose the optimum system according to the required flow rate. Contributes to reduced procedures and space. ■[Easy maintenance] The cylinder does not need remaining amount management, replacement, or refilling. The only required maintenance cost is electricity for the air compressor. Component replacement is possible without disassembling the piping.
Note

■It easily separates and purifies the high-purity nitrogen necessary for oxidation-proof and explosion-proof applications from compressed air.
Horizontal installation is now available with the added flexibility in installation. Furthermore, a wide range of nitrogen concentration is available from 90% to 99.9%. The optimum model is selected from the 17 flow rates and 25 model lineup, and the nitrogen supply state can be constantly monitored with an inline oxygen sensor and flow meter.