OHM Archives - Kanetsu

COOLCABI

Non-fluorocarbon Series Condensate-free type

Salient features

*Type of mounting: Lateral mounting（External only） *Cooling capacity : 300/350W ~ 2100/2300W *Rated volage（50/60Hz）: Single phase 200VAC, Three phase 200VAC *Function: Off-temperature alarm, Detection of abnormal heat dissipation, Detection of temperature sensor disconnection, Maintenance reminder, Forced cooling operation for inspection * Certificates/Approvals : EU RoHS2, CE

Note

* Working temperature : ＋20 to ＋50℃ ( Nominal values at 35℃ temperature both inside and outside are indicated in “Rated” and values at 50℃ outside and 35℃ inside are indicated in “Max)
* Temp. setting range: ＋30 to ＋45℃ （Initial setting:+35℃) (Use only within the specified temperature range)

COOLCABI

Non-fluorocarbon Series Slim & Short type

Salient features

*Type of mounting: Lateral mounting *Cooling capacity : 280 / 300W ~ 650/800W *Rated volage（50/60Hz）: Single phase 200~240VAC *Function: Off-temperature alarm, Detection of abnormal heat dissipation, Detection of temperature sensor disconnection, Maintenance reminder,Forced cooling operation for inspection * Certificates/Approvals : EU RoHS2, CE

Note

* Working temperature : ＋20 to ＋50℃ ( Nominal values at 35℃ temperature both inside and outside are indicated in “Rated” and values at 50℃ outside and 35℃ inside are indicated in “Max)
* Temp. setting range: ＋30 to ＋45℃ （Initial setting:+35℃) (Use only within the specified temperature range)

COOLCABI

Non-fluorocarbon Series Standard type Lateral mounting

Salient features

*Type of mounting: Lateral mounting *Cooling capacity : 250/300W ~ 2600/2900W *Rated volage（50/60Hz）: Single phase 200~240VAC * Communication function: RS485 (Modbus / RTU) *Function: Off-temperature alarm, Detection of abnormal heat dissipation, Detection of temperature sensor disconnection, Maintenance reminder, Forced cooling operation for inspection * Certificates/Approvals : EU RoHS2, CE

Note

* Working temperature : ＋20 to ＋50℃ ( Nominal values at 35℃ temperature both inside and outside are indicated in “Rated” and values at 50℃ outside and 35℃ inside are indicated in “Max)
* Temp. setting range: ＋30 to ＋45℃ （Initial setting:+35℃) (Use only within the specified temperature range)

COOLCABI

Non-fluorocarbon Series Standard type Roof mounting

Salient features

*Type of mounting: Roof mounting *Cooling capacity : 300/350W ~ 2700/3000W *Rated volage（50/60Hz）: Single phase 200~240VAC * Communication function: RS485 (Modbus / RTU) *Function: Off-temperature alarm, Detection of abnormal heat dissipation, Detection of temperature sensor disconnection, Maintenance reminder, Forced cooling operation for inspection,Detection of drain overflows, Detection of evaporator ice-up. * Certificates/Approvals : EU RoHS2, CE

Note

* Working temperature : ＋20 to ＋50℃ ( Nominal values at 35℃ temperature both inside and outside are indicated in “Rated” and values at 50℃ outside and 35℃ inside are indicated in “Max)
* Temp. setting range: ＋30 to ＋45℃ （Initial setting:+35℃) (Use only within the specified temperature range)

Factory

Electrostatic oil mist collector OMC-E series

Salient features

*　High collection capability by ionizing mist! *　Suitable for both oil and water-soluble mists *　Max. air flow ：8 / 10m3/min~ 40/45m3/min *　Collection efficiency：Min. 99% (by gravimetric method) *　Max. oil mist density :300mg3/min *　Rated voltage：3-phase, 200 VAC 50/60 Hz *　Suction port diameter：Ø148mm~Ø200mm *　Certificates/Approvals: EU RoHS

Note

* Working temperature : 0 to ＋40℃
* Max. suction air temp : ＋40℃

Machinery

Filter oil mist collector OMC-F series

Salient features

*99.8 % or higher collection rate! Low cost, high performance and energy saving *　Max. air flow : 4.2/5m3/min~18/20m3/min *　Collection efficiency：Min. 99.8% (by gravimetric method) *　Rated voltage：3-phase, 200VAC 50/60Hz *　Suction port diameter：Ø100mm~Ø150mm *　Certificates/Approvals: EU RoHS2

Note

* Working temperature : 0 to ＋40℃
* Max. suction air temp : ＋50℃

Machinery

Non-filter oil mist collector OMC-11

Salient features

*　Energy saving yet high power! *　Designed small and light weight *　Eliminates filter replacement and industrial waste *　Max. air flow ：8/10m3/min *　Collection efficiency：Min. 83%±5％ Particle diameter 2µm or larger *　Rated voltage：3-phase, 200VAC 50Hz/ 200 ‒ 220VAC 60Hz *　Suction port diameter：Ø123mm *　Certificates/Approvals: EU RoHS

Note

* Working temperature : 0 to ＋40℃
* Max. suction air temp : ＋50℃

Factory

Non-filter oil mist collector OMC-N2 series

Salient features

*　Super high collection efficiency as Non-Filter! *　Eliminates filter replacement and industrial waste *　Max. air flow ：4.5/5.0m3/min~ 21.5/24.5m3/min *　Collection efficiency：Min. 99% Particle diameter 2µm or larger *　Rated voltage：3-phase, 200VAC 50Hz/ 200 ‒ 220VAC 60Hz *　Suction port diameter：Ø98mm~Ø198mm *　Certificates/Approvals: EU RoHS2

Note

* Working temperature : 0 to ＋40℃
* Max. suction air temp : ＋80℃

ENVIRONMENTAL SOLUTION-DUST

For Clean Rooms High pressure type Laser marker use “ODU-DSA”

Salient features

・Eliminates fumes generated in soldering or laser marking process Suitable for clean rooms ・Max. air volume: 2.2 m3/min ~3.2m3/min ・Max. static pressure:9.1 kPa~ 9.5kPa ・Collection efficiency: Min. 99.97% (for 0.3μm or larger particles) ・Rated voltage (50/60Hz): Single phase, 100VAC ・Max. intake temperature: ＋40℃ * Certificates/Approvals: EU RoHS2

Note

* Working temperature : 0 to ＋40℃
* Max. intake temperature : ＋40℃

ENVIRONMENTAL SOLUTION-DUST

For Clean Rooms High pressure type ODU-HP

Salient features

・Suctions fine airborne dust with a large volume of air like a vent fan For clean room use ・Max. air volume: 2.2 m3/min~5.5 m3/min ・Max. static pressure: 9.1 kPa~13.5 kPa ・Collection efficiency: Min. 99.97% (for 0.3μm or larger particles) ・Rated voltage (50/60Hz): Single phase, 100VAC,200VAC ・Max. intake temperature: ＋40℃ * Certificates/Approvals: EU RoHS

Note

* Working temperature : 0 to ＋40℃
* Max. intake temperature : ＋40℃

ENVIRONMENTAL SOLUTION-DUST

For Clean Rooms High volume type ODU-HC

Salient features

・Suctions fine airborne dust with a large volume of air like a vent fan For clean room use ・Max. air volume: 2.9m3/min ~7.0 m3/min ・Max. static pressure: 2.5kPa ~2.9kPa ・Collection efficiency: Min. 99% (for 0.3μm or larger particles) ・Rated voltage (50/60Hz): Single phase, 100VAC ・Max. intake temperature: ＋40℃ * Certificates/Approvals : EU RoHS

Note

* Working temperature : 0 to ＋40℃
* Max. intake temperature : ＋40℃

ENVIRONMENTAL SOLUTION-DUST

For General Environments High volume type Laser marker use OSK-ACC

Salient features

・Suitable for laser markers of short time operation and low viscosity fumes in general environments ・Max. air volume: 2.8 m3/min ・Max. static pressure: 2.5 kPa ・Collection efficiency: Min.99% (for 0.3μm or larger particles) ・Rated voltage (50/60Hz): Single phase, 100VAC ・Certificates/Approvals : EU RoHS2

Note

* Working temperature : 0 to ＋40℃
* Max. intake temperature : ＋40℃

Login