Crimping Tool
Related products
Connectors
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, TERMINAL, PIN TERMINAL, INSULATED
- Nylon housing covers the disconnect for fully insulation.
MATERIAL ： Oxygen free copper tube.
(electro-tin-plated)
INSULATOR：NYLON , PVC
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, ROMEX, CABLE SUPPORTER,
- Distributed wire suspension system prevents the danger of temperature rise and deterioration of cable insulation.
- Snap onto the suspension bolt with ease.
- Prevent temperature rise of wires and also deterioration of wire insulation. Easy fit on the suspension bolt
MATERIAL Polypropylene（UL94V-0）
INSULATOR TEMPERATURE -15℃〜 75℃
INSTALLATION TEMP 0℃〜 40℃
SUSPENSION BOLT W 3/8 bolt
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, connector, compression
- Available for wire upto 1600mm2
- Compression connectors are typically larger in size to be used in high voltage power control applications. These connectors are compressed onto a conductor using hydraulic compression tools or dies.
- Part number:
C1-14 ~ C1-60
C2-14 ~ C2-500
C4-100 ~ C4-500
C6-600 ~ C6-1000
C1-14C ~C1-60C
C2-14C ~ C2-500C
C4-100C ~ C4-500C
C6-600C ~ C6-1000C
C6-1200A-SN ~ C6-1600A-SN
Conductive face is tin lead plated.
Do not use wires such as KIP, MLFC, LH, PNCT and PDP in JIS
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, TERMINAL, HIGH TEMPERATURE
- Solid nickel, allows wire connection under circumstance at temperature max. 400℃.
Material : Nikel for 400℃ max
Same tools used for Copper Terminals & Sleeves although endurance is low with high temperature terminals.
- Classification: NICHIFU, NCF, pin terminal, NICHIFU pin terminal,
- The Pin stuck out center of terminal barrel to fit smoothly in narrower terminal block. Insulation cap (UL94V-0) for each Pin terminal are available.
- Voltage : 600V/20A
- Non-insulated Pin terminal & Non-insulation VC CAP: TC type
- Environmentally friendly insulated terminals: TMEX TC Type
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, Closed end connector,
- For multiple wire connections to or from Fire Detector.
- Durable for 15 minutes at max. 380℃.
RATED VOLTAGE 300V
INSTALLATION TEMP：0 〜 40℃
INSULATOR TEMPERATURE：-40 〜 75℃
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, shunt wire
- Shunt wires are applied to connections between electrical machines with vibration, stretch and bending. Shunt wire is manufactured by putting the end of a flat braided wire with a seamed high quality copper tube, They are then compressed and molded.
- Part number:
SA Type: SA1-L ~ SA7-L
SB Type: SB1-L ~ SB12-L
SC Type: SC1-L ~ SC22-L
SD Type: SD1-L ~ SD14-L
SE Type: SE1-L ~ SE14-L
Size of braiding area and number and size of bolt hole
on terminal area of both ends are varied depend on
users needs.
- Classification: PANDUIT, PANDUIT DISTRIBUTOR, PANDUIT DISTRIBUTORS, PANDUIT VIETNAM, CABLE TIE TOOL, CABLE TIE, TOOL
- Panduit Manual Cable Tie Installation Tools
- Tool controlled tension provides flush cut-off and speeds
- Lightweight and balanced ergonomic design
- Excellent tools for low to medium volume applications
- Easy to change tension adjustment and easy to operate
- QPL per Mil. Std. SAE AS81306 and Mil.
- Spec. SAE AS90387
- For Use With: For Panduit SM, M, I and S cross-section cable ties
- Pneumatic Cable Tie Hand Tools
- Panduit Automatic Cable Tie Installation Systems
- The complete line of Panduit automatic cable tie installation systems offers a superior solution for high volume harness, assembly, fastening and packaging applications. These ergonomic systems increase productivity, provide consistent performance, and reduce activities that lead to repetitive motion injuries
- For Use With: For Panduit SM, M, I and S cross-section cable ties
- Standards Met : QPL per Mil. Std. SAE AS81306 and Mil. Spec. SAE AS90387 Mil. Spec. (Part Number MS90387-1)