Insulation Cap
Related products
Salient features
A series that forms the core of the dynamic series and is being developed with the aim of “for signals” and “for power supplies” of industrial equipment.
There are two types of pin arrangements, a standard 3.81 mm (150 mil) pitch and a high voltage type 5.08 mm (200 mil) pitch. The former is mainly for signal circuits and low voltage power supply circuits, and the latter is for high voltage power supply circuits. It is a specification for.
Especially for power supplies, in order to meet the demand for small size and high power due to the recent miniaturization of equipment, a newly developed copper alloy is used, and it is designed to allow a large current of 15A per pole to flow even though it is small.
Note
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, TERMINAL, HIGH TEMPERATURE
- Solid nickel, allows wire connection under circumstance at temperature max. 400℃.
Note
Material : Nikel for 400℃ max
Same tools used for Copper Terminals & Sleeves although endurance is low with high temperature terminals.
Salient features
Super simple wiring!
No special tools required: Universal pliers can be used.
No need to strip the wire coating: Just cut the wire to the required length and install it as it is
Side-by-side wiring: Even one person can do the work of connecting the relay between the power source and the load.
Transparent body: You can visually check whether the wiring is correct or not.
Wide range of applicable wire: Applicable to single wire, tinned wire and braided wire size from 0.3 to 0.75 sq
Revolutionary waterproof structure
Simple: Revolutionary waterproof construction with silicone-based hydrophobic gel filled inside the connector
Submerged: IPX8 Compliant * * Cleared flood test at a depth of 1m / 2 hours
High weather resistance: UV resistance can be used outdoors (UV resistant plastic is also used for housing)”
Note
Salient features
Ring terminals and spade lugs for reliable electrical connections
Ring terminals – known as lug terminals – are electrical terminals that join wiring to a stud or screw connection. On one end, ring terminals are equipped with a closed or open crimp barrel to make an electrical connection with the wire. On the other end is a ring-shaped tongue installed on equipment by a bolt or screw that goes through the ring. Spade terminals – known as spade lugs – join or disconnect a single wire that is connected to a screw or stud. Its shape, which resembles a fork or spade, allows the user to easily connect or disconnect the electrical connection. Spade terminals can help you to connect electrical wires quickly, because screws and bolts only require loosening – instead of complete disassembly – when attaching or removing a connection.
Note
Terminal & Splice Type
Flag Tongue
Hook Tongue
Lancelok
Multiple Stud
Offset Ring Tongue
Rectangular Tongue
Ring Tongue
Shur Plug
Slotted Ring Tongue
Spade Flange Tongue
Spade Tongue
Spark Plug
Splice
Spring Spade
Salient features
- Classification: TE products, AMP products, TE connectors, TE Vietnam, Power Connectors TE
- Power connectors are engineered to reliably connect power, providing efficient supply and distribution in communications equipment using between 5 and 1,000 amps. Manufactured for DC- and AC-powered applications, these power connectors types offer many configurations: our RAPID LOCK connector is a single-pole, quick connect/disconnect replacement for lug connection; our MULTI-BEAM XL is a blind-mateable, highly versatile connector with high reliability and high current density.
Note
CPC series: 1 cable or panel mount connector permit the use of multiple combinations of signal and coaxial circuits in the same housing by accepting durable Multimate contacts. From 4 thru 37 positions.
Salient features
The D-5000, which has the largest connector size in the dynamic series, is being developed with the aim of becoming a dedicated power connector for industrial equipment.
As with the D-3000 series, a newly developed copper alloy is used for the contacts to support high power, achieving 30A per pole.
The pin arrangement is 10.16 mm (400 mil), which allows a large pattern to be taken in consideration of the high current of the board type.
In addition, a high current α series has been added. Supports up to 45A per pole.
Note
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, connector, compression
- Available for wire upto 1600mm2
- Compression connectors are typically larger in size to be used in high voltage power control applications. These connectors are compressed onto a conductor using hydraulic compression tools or dies.
- Part number:
C1-14 ~ C1-60
C2-14 ~ C2-500
C4-100 ~ C4-500
C6-600 ~ C6-1000
C1-14C ~C1-60C
C2-14C ~ C2-500C
C4-100C ~ C4-500C
C6-600C ~ C6-1000C
C6-1200A-SN ~ C6-1600A-SN
Note
Conductive face is tin lead plated.
Do not use wires such as KIP, MLFC, LH, PNCT and PDP in JIS
Connectors
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, ICT, insulated chain
- Invented by Nichifu. Chain-like linked loose terminals reduce time and labor, and ensure quality crimps.
- ICT Part number and Shape:
ICT(Insulated Chain Terminal)
ICT Disconnects
ICCE Closed End
ICB Butt
CT(Non-insulated Chain Terminal)
Note
MATERIAL ：
Terminal/Sleeve ：Oxygen free copper (Electro-tin-plated）
Insulator：Vinyl/Nylon
RATED VOLTAGE： 300V