Ring Terminals
Related products
Salient features
A connector that is compact in the dynamic series but has achieved specifications for industrial equipment.
It can be used mainly for signal applications.
It has an appropriate pitch of 2.5 mm for signal lines of 250 V or less, and is compatible with AWG # 18 wires at this pitch. (1 pole maximum 5A)
In addition, it has various features such as a center lock method that enables effective use of the board and a contact lance for low profile rolls.
Note
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, connector, compression
- Available for wire upto 1600mm2
- Compression connectors are typically larger in size to be used in high voltage power control applications. These connectors are compressed onto a conductor using hydraulic compression tools or dies.
- Part number:
C1-14 ~ C1-60
C2-14 ~ C2-500
C4-100 ~ C4-500
C6-600 ~ C6-1000
C1-14C ~C1-60C
C2-14C ~ C2-500C
C4-100C ~ C4-500C
C6-600C ~ C6-1000C
C6-1200A-SN ~ C6-1600A-SN
Note
Conductive face is tin lead plated.
Do not use wires such as KIP, MLFC, LH, PNCT and PDP in JIS
Salient features
Achieves high current and high reliability of up to 65A In order to support high current of 65A, a crown band with a multi-point contact mechanism is used for the first time in the lycee contact.
Corresponding to protection class IP20 Finger protection of protection class IP20 is realized by attaching a new concept cap to the tip of the pin contact on the header side.
Ideal for safety measures in the power supply section of industrial equipment such as semiconductor manufacturing equipment, large control equipment, and machine tools.
Also supports sequential connection Two types of pin contacts, standard type and long type, are available.
It also supports applications that require sequential connection from the ground pin.
Note
Salient features
The smallest multi-pole signal connector in the dynamic series. Further miniaturization of industrial equipment can be realized.
An abundant series lineup is also a major feature. Available in pitches of 2.0 mm, 2.5 mm, and 3.5 mm. As for the color version, in addition to the standard color of the dynamic series so far, black, yellow and natural colors are also available. In addition, there are various features such as contacts that can handle a wide range of electric wires and crimping tools that can replace dies.
Note
Salient features
Super simple wiring!
No special tools required: Universal pliers can be used.
No need to strip the wire coating: Just cut the wire to the required length and install it as it is
Side-by-side wiring: Even one person can do the work of connecting the relay between the power source and the load.
Transparent body: You can visually check whether the wiring is correct or not.
Wide range of applicable wire: Applicable to single wire, tinned wire and braided wire size from 0.3 to 0.75 sq
Revolutionary waterproof structure
Simple: Revolutionary waterproof construction with silicone-based hydrophobic gel filled inside the connector
Submerged: IPX8 Compliant * * Cleared flood test at a depth of 1m / 2 hours
High weather resistance: UV resistance can be used outdoors (UV resistant plastic is also used for housing)”
Note
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, connectors, water tight, WP-TYPE
- No heat shrink tube needed. Silicon-bushing inside connector shut off water. Water-Proof Safety Code IP57 proven.
Note
- Rated voltage 300V
- Flame retardance UL94V-2 Insulator temperature − 40℃〜＋ 105℃
- Protection IP57（IEC529）
Connectors
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, connector, clamp connector, cover.
- Cable connection with branch. Various wire combinations are available upto total wire size of 700sq. mm. Specially designed insulation available for individual size.
- Clamp connectors tend to be highly resistant to oxidation and corrosion and are designed to seal the connection between flexible cords and metal enclosures. Manufactured using high quality copper materials.
- Part number: T7~T700 & Clamp Connector Cover T70C~T700C
Note
Applicable tool : NOP-120, NOH-360, NP-520
Salient features
- Classification: NICHIFU, NCF, pin terminal, NICHIFU pin terminal,
- The Pin stuck out center of terminal barrel to fit smoothly in narrower terminal block. Insulation cap (UL94V-0) for each Pin terminal are available.
- Voltage : 600V/20A
- Non-insulated Pin terminal & Non-insulation VC CAP: TC type
Note
- Environmentally friendly insulated terminals: TMEX TC Type