Insulation Cap
Related products
Salient features
- Classification: PANDUIT, PANDUIT DISTRIBUTOR, PANDUIT DISTRIBUTORS, PANDUIT VIETNAM, TERMINALS, CONNECTOR, TERMINAL PANDUIT
- All Panduit terminals feature high-quality materials made with electrolytic copper for high conductivity and tin-plated for corrosion resistance.
- Some types of terminals
- Disconnects
- Ferrules
- Fork Terminals
- Pin Terminals
- Terminal Applicators
- Wire Joints
- Ring Terminals,…
Note
- Material: Heat-Shrink, Polypropylene, Copper,Brass (70% Cu 30% Z), Iron Copper, Plating (Sn, Ni)
- Insulation Material: Vinyl, Nylon, Premium, Nylon Kynar
- Standards Met : UL 486 A/B – E52164, RoHS, IEEEE
Salient features
A connector for industrial equipment that is ideal for 20A power lines. We provide the optimum size for the small size and large current required by equipment.
The contact is a new design with 4-point contacts that increases the number of contacts and secures Hertz stress.
While ensuring a current value of 50% or more compared to the Dynamic 3000 series, the mating height has been increased by about 14%, achieving miniaturization.
The current capacity per unit volume is also increased by about 32% compared to existing products.
A 20A connector that inherits the concept of the popular Dynamic Series as a whole. (20A is guaranteed when used in 3P.)
Note
Salient features
A larger number of contacts can be mounted compared to a square connector of the same area.
Robust housing made of heat-resistant and autolytic thermoplastic resin enables use in harsh environments
Positive lock function ensures mating
Correspondence to environmentally hazardous substances: RoHS, REACH compliant
specification
Note
The following safety standards are approved for each model number. Please contact us for approval for each model number.
Please note that it may differ from the TE Connectivity performance specifications.
Salient features
- Classification: NICHIFU, NCF, pin terminal, NICHIFU pin terminal,
- The Pin stuck out center of terminal barrel to fit smoothly in narrower terminal block. Insulation cap (UL94V-0) for each Pin terminal are available.
- Voltage : 600V/20A
- Non-insulated Pin terminal & Non-insulation VC CAP: TC type
Note
- Environmentally friendly insulated terminals: TMEX TC Type
Salient features
The D-5000, which has the largest connector size in the dynamic series, is being developed with the aim of becoming a dedicated power connector for industrial equipment.
As with the D-3000 series, a newly developed copper alloy is used for the contacts to support high power, achieving 30A per pole.
The pin arrangement is 10.16 mm (400 mil), which allows a large pattern to be taken in consideration of the high current of the board type.
In addition, a high current α series has been added. Supports up to 45A per pole.
Note
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, connector, compression
- Available for wire upto 1600mm2
- Compression connectors are typically larger in size to be used in high voltage power control applications. These connectors are compressed onto a conductor using hydraulic compression tools or dies.
- Part number:
C1-14 ~ C1-60
C2-14 ~ C2-500
C4-100 ~ C4-500
C6-600 ~ C6-1000
C1-14C ~C1-60C
C2-14C ~ C2-500C
C4-100C ~ C4-500C
C6-600C ~ C6-1000C
C6-1200A-SN ~ C6-1600A-SN
Note
Conductive face is tin lead plated.
Do not use wires such as KIP, MLFC, LH, PNCT and PDP in JIS
Salient features
- Classificaiton: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, extra long butts, sleeve.
- Less distortion on Butt when crimped one side.
- Easy and smooth installation.
- Part number: B-type & P-type
Note
JIS, UL, CSA
NA 3, NA10, NA 20 air crimping tool.
NOH 300K (Head) requires hydraulic pump
Salient features
Achieves high current and high reliability of up to 65A In order to support high current of 65A, a crown band with a multi-point contact mechanism is used for the first time in the lycee contact.
Corresponding to protection class IP20 Finger protection of protection class IP20 is realized by attaching a new concept cap to the tip of the pin contact on the header side.
Ideal for safety measures in the power supply section of industrial equipment such as semiconductor manufacturing equipment, large control equipment, and machine tools.
Also supports sequential connection Two types of pin contacts, standard type and long type, are available.
It also supports applications that require sequential connection from the ground pin.
Note
