Insulation Cap
Related products
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, Closed end connector,
- For multiple wire connections to or from Fire Detector.
- Durable for 15 minutes at max. 380℃.
Note
RATED VOLTAGE 300V
INSTALLATION TEMP：0 〜 40℃
INSULATOR TEMPERATURE：-40 〜 75℃
Salient features
- Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, connector, compression
- Available for wire upto 1600mm2
- Compression connectors are typically larger in size to be used in high voltage power control applications. These connectors are compressed onto a conductor using hydraulic compression tools or dies.
- Part number:
C1-14 ~ C1-60
C2-14 ~ C2-500
C4-100 ~ C4-500
C6-600 ~ C6-1000
C1-14C ~C1-60C
C2-14C ~ C2-500C
C4-100C ~ C4-500C
C6-600C ~ C6-1000C
C6-1200A-SN ~ C6-1600A-SN
Note
Conductive face is tin lead plated.
Do not use wires such as KIP, MLFC, LH, PNCT and PDP in JIS
Salient features
The smallest multi-pole signal connector in the dynamic series. Further miniaturization of industrial equipment can be realized.
An abundant series lineup is also a major feature. Available in pitches of 2.0 mm, 2.5 mm, and 3.5 mm. As for the color version, in addition to the standard color of the dynamic series so far, black, yellow and natural colors are also available. In addition, there are various features such as contacts that can handle a wide range of electric wires and crimping tools that can replace dies.
Note
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, connectors, water tight, WP-TYPE
- No heat shrink tube needed. Silicon-bushing inside connector shut off water. Water-Proof Safety Code IP57 proven.
Note
- Rated voltage 300V
- Flame retardance UL94V-2 Insulator temperature − 40℃〜＋ 105℃
- Protection IP57（IEC529）
Salient features
A connector that is compact in the dynamic series but has achieved specifications for industrial equipment.
It can be used mainly for signal applications.
It has an appropriate pitch of 2.5 mm for signal lines of 250 V or less, and is compatible with AWG # 18 wires at this pitch. (1 pole maximum 5A)
In addition, it has various features such as a center lock method that enables effective use of the board and a contact lance for low profile rolls.
Note
Connectors
Salient features
- Classification: NICHIFU, NICHIFU connector, NCF connector, NICHIFU cos, quick connector
- QLX for solid copper wire. Translucent housing enables visual inspection of inserted wires.
- QL MC for 0.9～1.2mm diameter solid copper wire.
- QL SQ is a high temperature connector mainly for fire-detectors.
- Part number:
Note
Material : Stainless Steel
Connector contact : Oxygen free copper (Tin plated)
Housing : Polycarbonate (UL94V2)
Salient features
The D-5000, which has the largest connector size in the dynamic series, is being developed with the aim of becoming a dedicated power connector for industrial equipment.
As with the D-3000 series, a newly developed copper alloy is used for the contacts to support high power, achieving 30A per pole.
The pin arrangement is 10.16 mm (400 mil), which allows a large pattern to be taken in consideration of the high current of the board type.
In addition, a high current α series has been added. Supports up to 45A per pole.
Note
Salient features
- Classification: TE products, AMP products, TE connectors, TE Vietnam, Terminal Blocks & Strips TE
- Terminal blocks are insulated connections that fasten two or more wires together and have an insulating frame and a clamping system. Our broad portfolio of terminal blocks and barrier strips includes DIN Rail Terminal Blocks, Panel Mount Blocks, headers and receptacles. Our products come with a large set of ergonomic accessories. Our ranges are issued from known brands such as ENTRELEC and BUCHANAN.
Note
Connector Mounting Type:
Board Mount
Cable Mount (Free-Hanging)
DIN Rail
Motor
Panel Mount