JOINT COVERS_NICHIFU

    MATERIAL : P.V.C.UL94V-O（Translucent） INSULATOR TEMPERATURE　75℃
    WITHSTAND VOLTAGE　3000V

    Danh mục: , ,

      Protect wire joint area. Soft vinyl translucent cover makes
      instant visual inspection. Snap onto the suspension bolt.

      Sản phẩm tương tự

      Wiring Materials/Accessories

      Polymer Trefoil Cable Cleat

      Polymer Trefoil Cable Cleat_PANDUIT DISTRIBUTOR

      Đặc điểm nổi bật
      • Classification: PANDUIT, PANDUIT DISTRIBUTOR, PANDUIT DISTRIBUTORS, PANDUIT VIETNAM, TOOL, POLYMER TREFOIL CABLE CLEAT
      • Designed for medium-high short circuit faults in less harsh environments, this cable cleat is available in multiple sizes with cable range-taking capability.
      Ghi chú
      • Material: Nylon
      • Standards Met : IEC 61914:2015

      Connectors

      1. NFG & TFW TYPE 2. NF TYPE

      WIRE ENDS_NICHIFU

      Đặc điểm nổi bật
      • Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, wire ends
      • Makes stranded wire to single to be fittable to push-on terminal block or switch. Wider entry type for two wires also available.
       
      Ghi chú

      MATERIAL ： Oxygen free copper tube.
      (electro-tin-plated)
      INSULATOR：NYLON
      RATED VOLTAGE ： 300V
      INSULATOR TEMPERATURE ： -40℃〜 +105℃

      Wiring Materials/Accessories

      1. Splittable type 2. Slit type 3. QTM series

      Liquidtight insulation cap “QUICK CAP” lineup_OHM Distributor

      Đặc điểm nổi bật
      • Classification: OHM, OHM machine, OHM electric, OHM Distributor, OHM Electric Distributor, Quickcap, Quick cap, Liquidtight, Insulation cap, lineup
      • OA-QW with connection guide for single core cable splice (Provides excellent liquid and dust tight splicing of power cables, Applicable cable diameter Ø4 – 30mm)
      • OA-QW with connection guide for 2 core cable splice (Secures cable connections from liquid and dust, Applicable cable diameter Ø4 -11mm)
      • OA-QW with connection guide for 3,4 core cable splice (Provides excellent water and dust tight splicing of signal wires of sensors and limit switches, Applicable cable diameter Ø4 – 13 mm)
      Ghi chú
      • Protection category : IP 67
      • Rated volted : 600V DC/AC
      • Working temperature　-25 to ＋80℃
      • Oilproof : yes
      • Weatherproof : yes

      Wiring Materials/Accessories

      1. Introduction 2. Part Number

      HEAT SHRINK BUTT CONNECTORS_NICHIFU

      Đặc điểm nổi bật
      • Classification: NICHIFU, NCF, BUTT CONNECTOR, HEAT SHRINK, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR
      • It has the heat shrink tube over the butt connector.
      • Use a heat gun, the glue inside the tube will melt, then an air tight water/dust proof connection.
      Ghi chú

      RATED VOLTAGE : AC600V
      INSULATOR TEMPERATURE : 105℃

      Wiring Materials/Accessories

      GelWrap

      Đặc điểm nổi bật
      Workability:Easy installation just by winding / closing (time required 2 minutes) Completely waterproof:Can be used in manholes / handholes price :Significant cost reduction at new price Work efficiency:Immediate energization is possible after construction Eco proposal:Compatible with ECO cables
      Ghi chú

      specification
      Compatible cable
      600V CV (E), EM-CE single core, triplex

      Wiring Materials/Accessories

      P-Clamps: “Tool-Free” Harness Installation

      Đặc điểm nổi bật
      P-Clamps Enabling Next Generation Cable Assembly TE Connectivity (TE) P-Clamps provide a light, fast, and efficient harness solution to cable mounting. Our ten TE P-Clamp sizes cover the full cable diameter range of 21 standard P-Clamp sizes. Faster install times and lighter weight give TE P-Clamps a lower applied cost than standard P-Clamps.
      Ghi chú

      Cable Mounting Accessory Type
      Flexible Conduit Connector
      P-Clamp

      Connectors

      N & NB TYPE

      HIGH TEMPERATURE TERMINALS_NICHIFU

      Đặc điểm nổi bật
      • Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, TERMINAL, HIGH TEMPERATURE
      • Solid nickel, allows wire connection under circumstance at temperature max. 400℃.
      Ghi chú

      Material : Nikel for 400℃ max
      Same tools used for Copper Terminals & Sleeves although endurance is low with high temperature terminals.

      Tools

      ICT PNEUMATIC & ELECTRIC CRIMPING MACHINE
      NICHIFU Semi Automatic Pneumatic Crimping Machine NCA 100

      CRIMPING EQUIPMENT FOR ICT TERMINALS_NICHIFU

      Đặc điểm nổi bật
      • Classification: NICHIFU, NICHIFU VIETNAM, NCF VIETNAM, NICHIFU DISTRIBUTOR, Pneumatic, Electric Crimping machine
      • Choose either pneumatic (NCA) or electric (NCM). Easy to use and mounted one-touch change of applicator for various terminal type and size automatically feeds terminal one by one with standardized crimping position.
      Ghi chú

      ICT PNEUMATIC CRIMPING MACHINE（NCA 100）
      ICT ELECTRIC CRIMPING MACHINE（NCM 100）