- Classification: Omron, Omron distributor, Omron industrial automation, Omron FA, Omron Vietnam, Omron Mobile Robots, Mobile Robots Omron, Mobile Robots, Robotics, Industrial Safety, Traceability, Vision, Sensors, IO-Link, Sensing, Relay
- Autonomous Intelligent Vehicles (AIVs) assist with routine, labor intensive material handling tasks.
Related products
Control Devices/FA Systems
Pilot operated 3, 5-port valve (4GD/ER・M4GD/ER・MN4GD/ER)_CKD DISTRIBUTOR
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, PILOT, VALVE, VALVES, 4GD/ER・M4GD/ER・MN4GD/ER
- [Supports serial communication] IO-Link added in December 2020 CC-Link IE Field added in November 2020
- EtherNet/IP, DeviceNet, EtherCAT, CC-Link, CC-Link IE Field Basic, CC-Link IE Field, PROFINET, PROFI-BUS DP, IO-Link
- [Environmental performance] Reduces power consumption by adopting a new coil actuator. (0.35 W) [Ease of use] Wiring connector can be moved freely upwards and sideways. As the D sub-connector is also a rotary type, it can be moved freely upwards and sideways.
Note
- 3, 5-port valve with improved environmental performance, safety, reliability, and ease of use. High-function.
Salient features
- Classification: OHM, OHM electric, OHM Distributor, OHM Electric Distributor, Motor, detector, OMD-3, OMD-2
- Detects voltage from three-phase induction motor. It electrically judges rotation and stop and outputs a signal.
- It can be detected simply by connecting two wires to the motor.
- Mounting method: DIN rail (35mm width) mounting
- Rated voltage (50 / 60Hz): AC100V or 200V
- Detection delay time: 0.2-1.5sec Variable depending on volume
Note
- This detector is exclusively for AC200V three-phase induction motors. It cannot be used for single-phase commutator motors, etc.
- Certificates/Approvals : RoHS2
- Working temperature 0 to ＋55℃
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, FILTER
- [Minimal Pressure Loss Part1] Minimal pressure loss is realized by adopting a pleated structure element with a large filtration area.
- [Minimal Pressure Loss Part2] Minimal pressure loss through reduced clogging is achieved by using borosilicate media (with hydro- and oleophobic properties).
- [Pop-up indicator] A 360° high-visibility indicator, enabling differential pressure checking from all directions, is equipped as standard. (P/M types)
- [Easy element replacement] The push-fit element makes mounting easy.
Note
- This is a mainline filter that pursues energy savings, low pressure loss, and long life. The adoption of a 360-degree high visibility indicator helps to grasp the maintenance period and reduce the number of element replacement steps.
- [Applicable compressor] 15kW to 120 kW
Control Devices/FA Systems
Salient features
- Classification: Omron, Omron distributor, Omron industrial automation, Omron FA, Omron Vietnam, Omron Collaborative Robot, Collaborative Robot Omron, Collaborative Robot, Cobot, Cobot Omron, Omron Cobot, Robotics, Industrial Safety, Traceability, Vision, Sensors, IO-Link, Sensing, Relay
- The robot system allows collaborative operation with humans without safety fences
Note
- Collaborative Robots
- TM Series
- Collaborative robot for assembly, packaging, inspection and logistics
Control Devices/FA Systems
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, AIR BOOSTER, ABP2-HP1
- [Long service life] The design of the packing part of the cylinder has been optimized, and the long service life valve from the 4G Series has been adopted, achieving more than twice the durability of conventional products.
- [High reliability] Stable operation has been achieved by adopting the proprietary technology of our conventional ABP-12 product.
- [Low noise] By eliminating metal collisions, we have realized a 10dB reduction compared to conventional products. *Subject to CKD measurement conditions.
- [Flexible mounting in any direction] Installation according to the layout is possible using brackets. Select from 3 directions for pipe leadout.
- [Air tank] Can be compactly mounted with the air tank. The air tank can be selected from 2 sizes, 5L and 10L.
Note
- Generates high pressure air, double the primary pressure without electric power. Contributes to energy savings of the plant by utilizing existing compressed air equipment to boost pressure in areas where it is needed. Long service life components reduce total cost of plant.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, RODLESS CYLINDER, SRL3
- [Flat cylinder] Piston is flat, with a structure allowing it to receive load. Highly load-resistant, with rotation-stop mechanism also provided.
- [Sealing belt] Seal part is straight, improving sealing performance.
- [High-speed packing] A piston packing for high speed operation has been adopted.
- [Common port] A common port (one-side piping) or standard port (both sides piping) can be selected according to the installation location. Downsizing of equipment realized.
- [Magnet provided as standard] Compatible with switch installation as standard.
Note
- Resistant to high load and durable.
High-speed rodless cylinder Series runs from φ12 to φ100 with a variety of choices.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, MOTOR DRIVE, SERVO
- [Flexible combinations] Simply by combining standard products, we have constructed an orthogonal transport system suitable for any transport situation. It can be freely combined from single-axis to 4 axis.
- [Applicable to a wide range of transport applications] Supports transport from light load to high loads. Max. load capacity 250 kg. (Horizontal)
- [Long stroke length] Long stroke length compatible. Maximum stroke length 4450 mm (timing belt drive)
- [Controller] Just connect the single-axis controller with the link cable to create a multi-axis controller. High tact, simultaneous control up to 4 axes and complicated sealing work are also possible.
Note
- Electric actuator compatible with single and multi-axis servo motor drive.
- Combine the components freely for compatibility with any transport situation.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, MOTORLESS
- [Space-saving] A wide guide, “Outer Rail,” is used to support the load. In combination, the proper design of the slider part simultaneously achieves compact and high rigidity, and contributes to space.
- [Each Motor can be installed] A bracket is provided that matches the 12 servo motors and the three stepping motors. Combined with your own motors, it is available under familiar control. Each field network is supported.
- [Reduced installation time] The product can be installed directly from the top or bottom, without removing the cover. This significantly reduces work time, especially when installing from the top.
- [Low Dust Specification Option] Provides cleanness with class 2.5 equivalent (ISO14644-1 standards). Low dust generation is achieved by providing a vacuum port. Ideal for transport in clean environments. * For details on clean rating, refer to the catalog on pages for dust generation characteristics.
- [Easy Maintenance] A grease feed port capable of directly feeding grease from the outside is installed on the side of the slider. To maintain a guide and a ball screw by feeding fat from one place without disassembling a body.
Note
- [NEW] Added Low Dust Specification Option
- [NEW] Added Motor Manufacturer for Support
- A motorless specification of an electric actuator that allows you to install and control motors from each manufacturer.
- The Outer Rail System, which unifies the body and the guide, is compact and highly rigid. It has a grease supply port on the outside of the main body and is easy to install and maintain by enabling the top of the main body to be mounted.
- strokes: 50~1250mm
- Maximum portable mass (horizontal): 110kg
- Maximum speed: 1600mm/s