Related products
Salient features
- One touch and quick joint of indoor electrical wires.
- Applicable wire size : Copper/Solid wire φ1.6mm・φ2.0mm
- Insulation maximum operating temperature:120℃
- Rated:20A/300V
- Part number: NPJ P01-3P, NPJ B01-3P, NPJ B02-3P, NPJ 3PV-S
Note
- Material:
Plug Connector・Terminal Block:
Polycarbonate (Flame retardance UL94V-0)
VCTF-COVER:Polypropylene (transparent)
UNTI-DUST COVER:Silicon
CONTACT:Tin plated copper alloy
Salient features
Super simple wiring!
No special tools required: Universal pliers can be used.
No need to strip the wire coating: Just cut the wire to the required length and install it as it is
Side-by-side wiring: Even one person can do the work of connecting the relay between the power source and the load.
Transparent body: You can visually check whether the wiring is correct or not.
Wide range of applicable wire: Applicable to single wire, tinned wire and braided wire size from 0.3 to 0.75 sq
Revolutionary waterproof structure
Simple: Revolutionary waterproof construction with silicone-based hydrophobic gel filled inside the connector
Submerged: IPX8 Compliant * * Cleared flood test at a depth of 1m / 2 hours
High weather resistance: UV resistance can be used outdoors (UV resistant plastic is also used for housing)”
Note

Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, TERMINAL, HIGH TEMPERATURE
- Solid nickel, allows wire connection under circumstance at temperature max. 400℃.
Note
Material : Nikel for 400℃ max
Same tools used for Copper Terminals & Sleeves although endurance is low with high temperature terminals.
Salient features
- Classification: PANDUIT, PANDUIT DISTRIBUTOR, PANDUIT DISTRIBUTORS, PANDUIT VIETNAM, TERMINALS, CONNECTOR, TERMINAL PANDUIT
- All Panduit terminals feature high-quality materials made with electrolytic copper for high conductivity and tin-plated for corrosion resistance.
- Some types of terminals
- Disconnects
- Ferrules
- Fork Terminals
- Pin Terminals
- Terminal Applicators
- Wire Joints
- Ring Terminals,…
Note
- Material: Heat-Shrink, Polypropylene, Copper,Brass (70% Cu 30% Z), Iron Copper, Plating (Sn, Ni)
- Insulation Material: Vinyl, Nylon, Premium, Nylon Kynar
- Standards Met : UL 486 A/B – E52164, RoHS, IEEEE
Salient features
A connector that is compact in the dynamic series but has achieved specifications for industrial equipment.
It can be used mainly for signal applications.
It has an appropriate pitch of 2.5 mm for signal lines of 250 V or less, and is compatible with AWG # 18 wires at this pitch. (1 pole maximum 5A)
In addition, it has various features such as a center lock method that enables effective use of the board and a contact lance for low profile rolls.
Note

Connectors
Salient features
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, TERMINAL, PIN TERMINAL, INSULATED
- Nylon housing covers the disconnect for fully insulation.
Note
MATERIAL : Oxygen free copper tube.
(electro-tin-plated)
INSULATOR:NYLON , PVC
Salient features
The D-5000, which has the largest connector size in the dynamic series, is being developed with the aim of becoming a dedicated power connector for industrial equipment.
As with the D-3000 series, a newly developed copper alloy is used for the contacts to support high power, achieving 30A per pole.
The pin arrangement is 10.16 mm (400 mil), which allows a large pattern to be taken in consideration of the high current of the board type.
In addition, a high current α series has been added. Supports up to 45A per pole.
Note

Salient features
Achieves high current and high reliability of up to 65A In order to support high current of 65A, a crown band with a multi-point contact mechanism is used for the first time in the lycee contact.
Corresponding to protection class IP20 Finger protection of protection class IP20 is realized by attaching a new concept cap to the tip of the pin contact on the header side.
Ideal for safety measures in the power supply section of industrial equipment such as semiconductor manufacturing equipment, large control equipment, and machine tools.
Also supports sequential connection Two types of pin contacts, standard type and long type, are available.
It also supports applications that require sequential connection from the ground pin.
Note





