It is possible to safely branch and consolidate the power supply line without using a round crimp terminal and with a resin cover.
Related products
Control Devices/FA Systems
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, ABSODEX, AX7000X
- The basic functions are the same as AX9000T / AX9000TH.
- Supports three types of interface: Parallel I/O (NPN), CC-Link, and DeviceNet.
Note
- All actuators use absolute type position detectors.
The driver and actuator can be used in combination.
It is a product that can be used in a wide range of applications such as assembly.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, RODLESS CYLINDER, SRL3
- [Flat cylinder] Piston is flat, with a structure allowing it to receive load. Highly load-resistant, with rotation-stop mechanism also provided.
- [Sealing belt] Seal part is straight, improving sealing performance.
- [High-speed packing] A piston packing for high speed operation has been adopted.
- [Common port] A common port (one-side piping) or standard port (both sides piping) can be selected according to the installation location. Downsizing of equipment realized.
- [Magnet provided as standard] Compatible with switch installation as standard.
Note
- Resistant to high load and durable.
High-speed rodless cylinder Series runs from φ12 to φ100 with a variety of choices.
Salient features
- Classification: Omron, Omron distributor, Omron industrial automation, Omron FA, Omron Vietnam, Omron Clean Equipment, Clean Equipment Omron, Clean Equipment, Robotics, Industrial Safety, Traceability, Vision, Sensors, IO-Link, Sensing, Relay
- These products are to keep manufacturing environment clean for such as clean room or clean booth.
Note
- Air Clean Units: ZN-A
- Ionizers for Air Clean Unit: ZN-J
Control Devices/FA Systems
3, 5-port pilot operated valve (4GA/BR・M4GA/BR・MN4GA/BR)_ CKD DISTRIBUTOR
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, COMPACT CYLINDER
- 【10mm width spacer pilot check valve added】 Cylinder braking and position holding are possible for long periods. (Cylinder bore size: up to ø32) Manual discharge of secondary residual pressure is possible.
- 【Reliability】 Superb main valve sliding mechanism realizes low sliding/long service life. Response time 12 ±2 ms (4G1 type) Durability count: 100 million times (single solenoid) Improved responsivity after shutdown.
- 【Environmental performance】Continuous energization is made possible by adopting a new coil actuator. Reduced power consumption is also achieved. (0.35 W, 0.1 W / low exoergic / energy type]
- 【Safety】Both metal base and resin block have internal exhaust check valve (model No. instruction) Prevents backflow of air at the time of exhaust, preventing cylinder malfunction.
Note
- 3, 5-port valve with improved environmental performance, safety, reliability, and ease of use. High-function.
[Cylinder bore size: φ20 to φ100]
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, MOVER, ELECTRIC SHUTTLE MOVER
- [Space saving] 2D operation is realized without using multi-axis or gantry robots.
- Contributes to space saving with effective use of space. Supports long strokes of up to 20 m, inconceivable for conventional electric actuators.
- [Smooth operation realized] The servo motor drive enables freely adjustable setting of multipoint positioning speed. Smooth start / stop is realized.
- [Applicable to motors from all manufacturers] Mount a motor you're familiar with. Brackets compatible with all manufacturers' motors are available.
Note
- Transport system that enables single-axis 2D transport with one motor.
- Long stroke of up to 20 m. Multipoint positioning / Soft start & stop possible.
- This is a motorless specification.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, FILTER
- [Minimal Pressure Loss Part1] Minimal pressure loss is realized by adopting a pleated structure element with a large filtration area.
- [Minimal Pressure Loss Part2] Minimal pressure loss through reduced clogging is achieved by using borosilicate media (with hydro- and oleophobic properties).
- [Pop-up indicator] A 360° high-visibility indicator, enabling differential pressure checking from all directions, is equipped as standard. (P/M types)
- [Easy element replacement] The push-fit element makes mounting easy.
Note
- This is a mainline filter that pursues energy savings, low pressure loss, and long life. The adoption of a 360-degree high visibility indicator helps to grasp the maintenance period and reduce the number of element replacement steps.
- [Applicable compressor] 15kW to 120 kW
Control Devices/FA Systems
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, FILTER, MOTOR DRIVE, EBS-M, EBS-G
- [More Space Saving of Equipment] Since the motor is built into the actuator, there are no projections or folds in the motor assembly. Therefore, space saving of equipment is possible.
- [Flexible Production] Unlike pneumatic cylinders, electric actuators can perform multipoint positioning anywhere. As one actuator can handle the production of various types of products, this contributes to space savings.
- [Expanded Options] The compact design is possible due to the dimensional compatibility with the pneumatic cylinder LCR Series. In addition, since soft starts and soft stops are possible, shock absorbers are not required.
Note
- The table type electric actuator has a a short stroke and is ideal for transporting and position
Salient features
- Classification: OHM, OHM electric, OHM Distributor, OHM Electric Distributor, Motor, detector, OMD-3, OMD-2
- Detects voltage from three-phase induction motor. It electrically judges rotation and stop and outputs a signal.
- It can be detected simply by connecting two wires to the motor.
- Mounting method: DIN rail (35mm width) mounting
- Rated voltage (50 / 60Hz): AC100V or 200V
- Detection delay time: 0.2-1.5sec Variable depending on volume
Note
- This detector is exclusively for AC200V three-phase induction motors. It cannot be used for single-phase commutator motors, etc.
- Certificates/Approvals : RoHS2
- Working temperature 0 to ＋55℃