FEATURED PRODUCTS
Salient features
Noise is reduced by adopting a DC motor
Noise is reduced by adopting a DC motor direct drive system. You can easily adjust the speed of the motor.
It also supports step movements with the jog button, improving workability such as checking the operation of the applicator and adjusting the terminal feed.
A wide range of compatible options, compatible with applicators made by other companies
A wide variety of options are available to support a wide variety of crimping operations. You can also replace the applicator quickly. It is compatible with applicators made by other companies and is easy to replace.
Prepare a safety cover
If the safety cover opens while driving, it will stop instantly. You cannot resume work until you close the safety cover.
Not only does it ensure the safety of workers, but it also prevents accidents caused by malfunctions during applicator replacement.
Other features
・ Crimping height can be adjusted in increments of 0.013 mm within a range of ± 0.25 mm
・Can be used at AC100 to 240V
・ A wide variety of options are available according to the work environment
Note
Salient features
It is possible to safely branch and consolidate the power supply line without using a round crimp terminal and with a resin cover.
Note
● Rated current value: 80A to 550A
Salient features
Super simple wiring!
No special tools required: Universal pliers can be used.
No need to strip the wire coating: Just cut the wire to the required length and install it as it is
Side-by-side wiring: Even one person can do the work of connecting the relay between the power source and the load.
Transparent body: You can visually check whether the wiring is correct or not.
Wide range of applicable wire: Applicable to single wire, tinned wire and braided wire size from 0.3 to 0.75 sq
Revolutionary waterproof structure
Simple: Revolutionary waterproof construction with silicone-based hydrophobic gel filled inside the connector
Submerged: IPX8 Compliant * * Cleared flood test at a depth of 1m / 2 hours
High weather resistance: UV resistance can be used outdoors (UV resistant plastic is also used for housing)”
Note
Salient features
A larger number of contacts can be mounted compared to a square connector of the same area.
Robust housing made of heat-resistant and autolytic thermoplastic resin enables use in harsh environments
Positive lock function ensures mating
Correspondence to environmentally hazardous substances: RoHS, REACH compliant
specification
Note
The following safety standards are approved for each model number. Please contact us for approval for each model number.
Please note that it may differ from the TE Connectivity performance specifications.
Salient features
The smallest multi-pole signal connector in the dynamic series. Further miniaturization of industrial equipment can be realized.
An abundant series lineup is also a major feature. Available in pitches of 2.0 mm, 2.5 mm, and 3.5 mm. As for the color version, in addition to the standard color of the dynamic series so far, black, yellow and natural colors are also available. In addition, there are various features such as contacts that can handle a wide range of electric wires and crimping tools that can replace dies.
Note
Salient features
A connector that is compact in the dynamic series but has achieved specifications for industrial equipment.
It can be used mainly for signal applications.
It has an appropriate pitch of 2.5 mm for signal lines of 250 V or less, and is compatible with AWG # 18 wires at this pitch. (1 pole maximum 5A)
In addition, it has various features such as a center lock method that enables effective use of the board and a contact lance for low profile rolls.
Note
Salient features
A series that forms the core of the dynamic series and is being developed with the aim of “for signals” and “for power supplies” of industrial equipment.
There are two types of pin arrangements, a standard 3.81 mm (150 mil) pitch and a high voltage type 5.08 mm (200 mil) pitch. The former is mainly for signal circuits and low voltage power supply circuits, and the latter is for high voltage power supply circuits. It is a specification for.
Especially for power supplies, in order to meet the demand for small size and high power due to the recent miniaturization of equipment, a newly developed copper alloy is used, and it is designed to allow a large current of 15A per pole to flow even though it is small.
Note
Salient features
A connector for industrial equipment that is ideal for 20A power lines. We provide the optimum size for the small size and large current required by equipment.
The contact is a new design with 4-point contacts that increases the number of contacts and secures Hertz stress.
While ensuring a current value of 50% or more compared to the Dynamic 3000 series, the mating height has been increased by about 14%, achieving miniaturization.
The current capacity per unit volume is also increased by about 32% compared to existing products.
A 20A connector that inherits the concept of the popular Dynamic Series as a whole. (20A is guaranteed when used in 3P.)
Note
Salient features
The D-5000, which has the largest connector size in the dynamic series, is being developed with the aim of becoming a dedicated power connector for industrial equipment.
As with the D-3000 series, a newly developed copper alloy is used for the contacts to support high power, achieving 30A per pole.
The pin arrangement is 10.16 mm (400 mil), which allows a large pattern to be taken in consideration of the high current of the board type.
In addition, a high current α series has been added. Supports up to 45A per pole.
Note
Salient features
Achieves high current and high reliability of up to 65A In order to support high current of 65A, a crown band with a multi-point contact mechanism is used for the first time in the lycee contact.
Corresponding to protection class IP20 Finger protection of protection class IP20 is realized by attaching a new concept cap to the tip of the pin contact on the header side.
Ideal for safety measures in the power supply section of industrial equipment such as semiconductor manufacturing equipment, large control equipment, and machine tools.
Also supports sequential connection Two types of pin contacts, standard type and long type, are available.
It also supports applications that require sequential connection from the ground pin.
Note
Salient features
Workability:Easy installation just by winding / closing (time required 2 minutes)
Completely waterproof:Can be used in manholes / handholes
price :Significant cost reduction at new price
Work efficiency:Immediate energization is possible after construction
Eco proposal:Compatible with ECO cables
Note
specification
Compatible cable
600V CV (E), EM-CE single core, triplex