- Classification: OHM, OHM electric, OHM Distributor, OHM Electric Distributor, Motor, detector, OMD-3, OMD-2
- Detects voltage from three-phase induction motor. It electrically judges rotation and stop and outputs a signal.
- It can be detected simply by connecting two wires to the motor.
- Mounting method: DIN rail (35mm width) mounting
- Rated voltage (50 / 60Hz): AC100V or 200V
- Detection delay time: 0.2-1.5sec Variable depending on volume
Related products
Salient features
- Classification: Omron, Omron distributor, Omron industrial automation, Omron FA, Omron Vietnam, Omron Wiring System, Wiring System Omron, Wiring System, Wire, Robotics, Industrial Safety, Traceability, Vision, Sensors, IO-Link, Sensing, Relay
- These Components help save work and space when connecting PLC, DeviceNet, and CompoBus/S Systems.
Note
- Connector-Terminal Block Conversion Units
- I/O Relay Terminals
- Industrial Ethernet Connectors
- DIN Track Terminal Blocks
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, RODLESS CYLINDER, SRL3
- [Flat cylinder] Piston is flat, with a structure allowing it to receive load. Highly load-resistant, with rotation-stop mechanism also provided.
- [Sealing belt] Seal part is straight, improving sealing performance.
- [High-speed packing] A piston packing for high speed operation has been adopted.
- [Common port] A common port (one-side piping) or standard port (both sides piping) can be selected according to the installation location. Downsizing of equipment realized.
- [Magnet provided as standard] Compatible with switch installation as standard.
Note
- Resistant to high load and durable.
High-speed rodless cylinder Series runs from φ12 to φ100 with a variety of choices.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, MOVER, ELECTRIC SHUTTLE MOVER
- [Space saving] 2D operation is realized without using multi-axis or gantry robots.
- Contributes to space saving with effective use of space. Supports long strokes of up to 20 m, inconceivable for conventional electric actuators.
- [Smooth operation realized] The servo motor drive enables freely adjustable setting of multipoint positioning speed. Smooth start / stop is realized.
- [Applicable to motors from all manufacturers] Mount a motor you're familiar with. Brackets compatible with all manufacturers' motors are available.
Note
- Transport system that enables single-axis 2D transport with one motor.
- Long stroke of up to 20 m. Multipoint positioning / Soft start & stop possible.
- This is a motorless specification.
Salient features
- Classification: Omron, Omron distributor, Omron industrial automation, Omron FA, Omron Vietnam, Omron UV-Light Curing System, UV-Light Curing System Omron, UV-Light Curing System, Robotics, Industrial Safety, Traceability, Vision, Sensors, IO-Link, Sensing, Relay
- OMRON’s UV-Light Curing Systems using 365-nm, high-power UV LEDs as the light source. They achieve high-precision UV curing with little thermal damage.
Note
- Smart Curing System (Standard model/Multi-function model): ZUV Series
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CYLINDER STG, CYLINDER CKD
- [Supports high load] Improved lateral load proof characteristics and stable operation by improving the metal bearing material and bearing structure.
- [Specially designed tools unnecessary] An Allen wrench is used for piston rod mounting. Special tools are not required for maintenance.
- [Reduction of weight and resource saving] Aluminum body shape of the cylinder body reviewed, reduction of weight and resource saving achieved.
- [2 directions for piping, 3 types of mounting] Piping processing is easy and the visibility of the cylinder switch is improved.
Note
- Lighter weight / resource saving.
- In addition, the guide rod bearing section is improved and the metal bearing material and bearing structure are modified. This improves the lateral load proof characteristics, realizing stable operation.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, MOTOR DRIVE, SERVO
- [Flexible combinations] Simply by combining standard products, we have constructed an orthogonal transport system suitable for any transport situation. It can be freely combined from single-axis to 4 axis.
- [Applicable to a wide range of transport applications] Supports transport from light load to high loads. Max. load capacity 250 kg. (Horizontal)
- [Long stroke length] Long stroke length compatible. Maximum stroke length 4450 mm (timing belt drive)
- [Controller] Just connect the single-axis controller with the link cable to create a multi-axis controller. High tact, simultaneous control up to 4 axes and complicated sealing work are also possible.
Note
- Electric actuator compatible with single and multi-axis servo motor drive.
- Combine the components freely for compatibility with any transport situation.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, MN3E・MN4E, PLC, COMPATIBLE BLOCK MANIFOLD
- [Abundant communication support] Compatible with EtherNet / IP, EtherCAT, CC-Link, and DeviceNet. *November 2020, EtherNet/IP added.
- [Thin / space saving] MN3/4E00 Series is the thinnest at 7 mm, contributing to space saving. MN3/4E 0 series is a 10 mm high performance block manifold not only contributing to space saving, but also offering excellent responsiveness. (N3E0 Series two 3-port valves integrated type: A.B port both 12 ms)
- [Environmental conservation] Lighter weight and reduced material usage by downsizing / energy saving. We were among the earliest to reduce chemical substances affecting the environment, including lead-free solder and materials compatible with JIG-101A level A. With energy saving type (Option E), it further reduces power consumption.
- [Wide range of fitting variations] Inch size compatible with push-in fitting, ideal for use in the Western market. It also supports φ3 and φ1.8 tubes, contributing to space saving of piping.
- [Wide array of electrical connections] Serial transmission corresponding to various connectors and networks are available.
- [Pursuit of safety] Exhaust check valve, manual cover to prevent misoperation and air supply filter to prevent entry of foreign matter are provided as standard.
- Also supports individual wiring.
- Easily pluggable regulator blocks are also available.
Note
- More compact (39.5 mm high) and high-performance cassette 3, 4-port block manifold is also available.
Control Devices/FA Systems
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, NITROGEN, GAS EXTRACTION, NS・NSU
- [Improved flexibility in installation and design] Horizontal installation is now available. Improved ease of use, including installation in dead space and being built into equipment.
- [Expanded concentration range] The nitrogen concentration range is now available from 90%. It is easy to use for low nitrogen-containing applications.
- [Easy purification] Easily purifies nitrogen gas without using a cylinder or large equipment. Generates a nitrogen-enriched gas by utilizing a hollow fiber separation membrane that easily transmits oxygen.
- [More compact and convenient through 3 reductions] Reduced piping: Long piping work is unnecessary since it can be installed near equipment. Reduced processes / space: We propose the optimum system according to the required flow rate. Contributes to reduced procedures and space.
- [Easy maintenance] The cylinder does not need remaining amount management, replacement, or refilling. The only required maintenance cost is electricity for the air compressor. Component replacement is possible without disassembling the piping.
Note
- It easily separates and purifies the high-purity nitrogen necessary for oxidation-proof and explosion-proof applications from compressed air.
Horizontal installation is now available with the added flexibility in installation. Furthermore, a wide range of nitrogen concentration is available from 90% to 99.9%. The optimum model is selected from the 17 flow rates and 25 model lineup, and the nitrogen supply state can be constantly monitored with an inline oxygen sensor and flow meter.