Categories
Salient features
- Classification: KDK, KDK distributor, KDK Vietnam, electric wire, electric wire KDK, Kawasaki electric wire, Kawasaki densen, UL 1015
- UL standard single core wire Size from AWG 24 to AWG 10 PVC sheath Maximum working voltage: 600V Maximum operating temperature: 105℃ Full range of colors including ground color (yellow/green)
Note
- This specification specifies vinyl wire for internal wiring of heat-resistant equipment in accordance with UL 758 Type 1015 and CSA C22.2 No127 Type TEW standards.
- Provides better heat resistance than Japanese standard 600V rated wire (KIV, IV)
Salient features
- Classification: KDK, KDK distributor, KDK Vietnam, electric wire, electric wire KDK, Kawasaki electric wire, Kawasaki densen, VCT type
- Japan Standard Core Noise Wire PSE Size 0.75,1.25,2,…MM² PVC sheath Maximum working voltage: 600V Maximum operating temperature: 105℃
Note
- Used for power supply and wiring for mobile electrical equipment from 600V and below, used in factories and construction sites.
Salient features
- Classification: KDK, KDK distributor, KDK Vietnam, electric wire, electric wire KDK, Kawasaki electric wire, Kawasaki densen, VCTF type
- Japan Standard Core Noise Wire PSE Size 0.3,0.75,1.25,2,…MM² PVC sheath Maximum working voltage: 300V Maximum operating temperature: 60℃
Note
- Used as a power cord for small electrical appliances of 300V or less for indoor use.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, COMPACT CYLINDER
- [Cylinder switch grooves provided on four surfaces] (Excluding φ12, 16) A cylinder switch can be mounted on the same surface as the piping port, which improves visibility and maintenance efficiency.
- [End thread options] Rod ends can be selected from two options: female thread (standard) and male thread (option).
- [All bore sizes, T type switch mountable] The T type switch used in many CKD products can be mounted on cylinders of all bore sizes. The use of a unified switch helps to reduce stock quantity.
Note
- Space saving series with a wide range of stroke lengths and switch mounting surface options compared with conventional models.
A widely varied series of space-saving cylinders, suitable for everything from general environments to specific applications.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CYLINDER STG, CYLINDER CKD
- [Supports high load] Improved lateral load proof characteristics and stable operation by improving the metal bearing material and bearing structure.
- [Specially designed tools unnecessary] An Allen wrench is used for piston rod mounting. Special tools are not required for maintenance.
- [Reduction of weight and resource saving] Aluminum body shape of the cylinder body reviewed, reduction of weight and resource saving achieved.
- [2 directions for piping, 3 types of mounting] Piping processing is easy and the visibility of the cylinder switch is improved.
Note
- Lighter weight / resource saving.
- In addition, the guide rod bearing section is improved and the metal bearing material and bearing structure are modified. This improves the lateral load proof characteristics, realizing stable operation.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, RODLESS CYLINDER, SRL3
- [Flat cylinder] Piston is flat, with a structure allowing it to receive load. Highly load-resistant, with rotation-stop mechanism also provided.
- [Sealing belt] Seal part is straight, improving sealing performance.
- [High-speed packing] A piston packing for high speed operation has been adopted.
- [Common port] A common port (one-side piping) or standard port (both sides piping) can be selected according to the installation location. Downsizing of equipment realized.
- [Magnet provided as standard] Compatible with switch installation as standard.
Note
- Resistant to high load and durable.
High-speed rodless cylinder Series runs from φ12 to φ100 with a variety of choices.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CYLINDER SCG, CYLINDER CKD, TIE ROD CYLINDER
- [Port and needle on the same surface] The air supply / exhaust ports and cushion needle are positioned on the same surface. Tie rod general-purpose cylinder with easy installation and adjustment of the cylinder.
- [Compact switch equipped] The smaller T switch than the conventional Contributes to space saving by eliminating switch protrusions when mounted.
- [A wide variety of options and variations] Various variations including position locking, rotation-stop and rubber scraper are available. Designing the layout is simple since the functions related to a built-in scraper, such as the anti-spatter adherence type and rubber scraper, have the same dimensions as those of the standard.
Note
- Medium bore size (φ32 to φ100) series of standard tie rod cylinders.
Environment-friendly cylinder that has eliminated hazardous substances. Suitable for all applications with reliable performance and a wide variety of options.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, F.R.L
- [F.R.L. combination] Systems are easily upgraded using unified key boundary dimensions and a diverse range of options and variations.
- [Compacting, modularization] Main dimensions (width and depth) of F.R.L. products have been standardized as compact module. Accurate assembly dimensions can be obtained with simple calculations.
- [Long service life element] This element incorporates CKD's original chemical fiber structure (patent pending), which has a rough surface and gradually becomes finer toward the interior. Clogging is greatly reduced, and the element life is greatly extended.
Note
- Compact modular design in which major boundary
dimensions of devices such as filters, regulators, lubricators, etc., are unified.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, COMPACT CYLINDER
- 【10mm width spacer pilot check valve added】 Cylinder braking and position holding are possible for long periods. (Cylinder bore size: up to ø32) Manual discharge of secondary residual pressure is possible.
- 【Reliability】 Superb main valve sliding mechanism realizes low sliding/long service life. Response time 12 ±2 ms (4G1 type) Durability count: 100 million times (single solenoid) Improved responsivity after shutdown.
- 【Environmental performance】Continuous energization is made possible by adopting a new coil actuator. Reduced power consumption is also achieved. (0.35 W, 0.1 W / low exoergic / energy type]
- 【Safety】Both metal base and resin block have internal exhaust check valve (model No. instruction) Prevents backflow of air at the time of exhaust, preventing cylinder malfunction.
Note
- 3, 5-port valve with improved environmental performance, safety, reliability, and ease of use. High-function.
[Cylinder bore size: φ20 to φ100]
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, PILOT, VALVE, VALVES, 4GD/ER・M4GD/ER・MN4GD/ER
- [Supports serial communication] IO-Link added in December 2020 CC-Link IE Field added in November 2020
- EtherNet/IP, DeviceNet, EtherCAT, CC-Link, CC-Link IE Field Basic, CC-Link IE Field, PROFINET, PROFI-BUS DP, IO-Link
- [Environmental performance] Reduces power consumption by adopting a new coil actuator. (0.35 W) [Ease of use] Wiring connector can be moved freely upwards and sideways. As the D sub-connector is also a rotary type, it can be moved freely upwards and sideways.
Note
- 3, 5-port valve with improved environmental performance, safety, reliability, and ease of use. High-function.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, MN3E・MN4E, PLC, COMPATIBLE BLOCK MANIFOLD
- [Abundant communication support] Compatible with EtherNet / IP, EtherCAT, CC-Link, and DeviceNet. *November 2020, EtherNet/IP added.
- [Thin / space saving] MN3/4E00 Series is the thinnest at 7 mm, contributing to space saving. MN3/4E 0 series is a 10 mm high performance block manifold not only contributing to space saving, but also offering excellent responsiveness. (N3E0 Series two 3-port valves integrated type: A.B port both 12 ms)
- [Environmental conservation] Lighter weight and reduced material usage by downsizing / energy saving. We were among the earliest to reduce chemical substances affecting the environment, including lead-free solder and materials compatible with JIG-101A level A. With energy saving type (Option E), it further reduces power consumption.
- [Wide range of fitting variations] Inch size compatible with push-in fitting, ideal for use in the Western market. It also supports φ3 and φ1.8 tubes, contributing to space saving of piping.
- [Wide array of electrical connections] Serial transmission corresponding to various connectors and networks are available.
- [Pursuit of safety] Exhaust check valve, manual cover to prevent misoperation and air supply filter to prevent entry of foreign matter are provided as standard.
- Also supports individual wiring.
- Easily pluggable regulator blocks are also available.
Note
- More compact (39.5 mm high) and high-performance cassette 3, 4-port block manifold is also available.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, AIR BOOSTER, ABP2-HP1
- [Long service life] The design of the packing part of the cylinder has been optimized, and the long service life valve from the 4G Series has been adopted, achieving more than twice the durability of conventional products.
- [High reliability] Stable operation has been achieved by adopting the proprietary technology of our conventional ABP-12 product.
- [Low noise] By eliminating metal collisions, we have realized a 10dB reduction compared to conventional products. *Subject to CKD measurement conditions.
- [Flexible mounting in any direction] Installation according to the layout is possible using brackets. Select from 3 directions for pipe leadout.
- [Air tank] Can be compactly mounted with the air tank. The air tank can be selected from 2 sizes, 5L and 10L.
Note
- Generates high pressure air, double the primary pressure without electric power. Contributes to energy savings of the plant by utilizing existing compressed air equipment to boost pressure in areas where it is needed. Long service life components reduce total cost of plant.