Showing 157–168 of 213 results

Email
Shop
Salient features
  • Classification: OHM electric, OHM Distributor, OHM Electric Distributor, Clean room, High Volume, ODU-HC
  • Suctions fine airborne dust with a large volume of air like a vent fan For clean room use
  • Max. air volume: 2.9m3/min ~7.0 m3/min
  • Max. static pressure: 2.5kPa ~2.9kPa
  • Collection efficiency: Min. 99% (for 0.3μm or larger particles)
  • Rated voltage (50/60Hz): Single phase, 100VAC ・Max. intake temperature: +40℃
  • Certificates/Approvals : EU RoHS
Note
  • Working temperature : 0 to +40℃
  • Max. intake temperature : +40℃
Salient features
  • Classification: OHM electric, OHM Distributor, OHM Electric Distributor, General Environments, High Volume, Laser marker, OSK-ACC
  • Suitable for laser markers of short time operation and low viscosity fumes in general environments
  • Max. air volume: 2.8 m3/min
  • Max. static pressure: 2.5 kPa
  • Collection efficiency: Min.99% (for 0.3μm or larger particles)
  • Rated voltage (50/60Hz): Single phase, 100VAC
  • Certificates/Approvals : EU RoHS2
Note
  • Working temperature : 0 to +40℃
  • Max. intake temperature : +40℃
Salient features
  • Classification: OHM, OHM machine, OHM electric, OHM Distributor, OHM Electric Distributor, CAPCON, lineup
  • OA-1 series Standard (Long selling Cable gland! Accepts wide-ranging cable sizes, Applicable cable diameter Ø3.5 – 19mm)
  • OA-1 series for small valves (Applications For cable exits of DIN standard (Pg11) electromagnetic valves, Applicable cable diameter Ø3.5 – 19mm)
Note
  • Working temperature : -25to +70℃
  • Certificates/Approvals : EU RoHS2
Salient features
  • Classification: OHM, OHM machine, OHM electric, OHM Distributor, OHM Electric Distributor, QUICK CAP, QUICKCAP, insulation cap, lineup
  • Insulation cap for ring terminals OA-QM (Provides quick and high quality insulation to screw fastened terminals (for 3/4/5/6 mm)
  • Insulation cap for ring terminals OA-QCM (Simply put cap on the screw fastened terminals for insulation (for 8, 10 mm))
  • Multiple connection insulation cap OA-QTM for relaying (Convenient, terminal block and box in one. Eliminates troublesome taping work.)
  • Multiple connection insulation cap OA-QTM for branching of power line (For branching power supply up to 600V, 30A and power lines)
Note

* Rated volted : 600V DC/AC
* Working temperature -20 ~+70℃ (80)
* Certificates/Approvals : EU RoHS2

Salient features
  • Classification: OHM, OHM machine, OHM electric, OHM Distributor, OHM Electric Distributor, Capcon, Liquidtight, cable gland, lineup
  • OA-W series Wide Range:(Applicable to broad range of cable sizes!CTG and Metric screw type added, Applicable cable diameter Ø4 – 20mm)
  • OA-W series Standard (Versatile product lineup different in color, applicable cable size or working condition, Applicable cable diameter Ø2 – 30mm)
  • OA-W series Multiple (2 to 4 cables are clamped all at once. Saves both labor and space! Applicable cable diameter Ø1.7 – 7mm)
  • OA-W series Slit (Slit rubber bushing enables clamping connector cables at entry/exit ports, Applicable cable diameter Ø2.2 – 20mm)
  • OA-W series Splittable (For clamping and waterproofing a cable with connector, Applicable cable diameter Ø6 – 13mm)
Note
  • Protection category : IP 67
  • Certificates/Approvals : EU RoHS2, (CE)
  • Working temperature : 0 to +40℃
  • Max. intake temperature : +40℃
Salient features
  • Classification: OHM, OHM machine, OHM electric, OHM Distributor, OHM Electric Distributor, Quickcap, Quick cap, Liquidtight, Insulation cap, lineup
  • OA-QW with connection guide for single core cable splice (Provides excellent liquid and dust tight splicing of power cables, Applicable cable diameter Ø4 – 30mm)
  • OA-QW with connection guide for 2 core cable splice (Secures cable connections from liquid and dust, Applicable cable diameter Ø4 -11mm)
  • OA-QW with connection guide for 3,4 core cable splice (Provides excellent water and dust tight splicing of signal wires of sensors and limit switches, Applicable cable diameter Ø4 – 13 mm)
Note
  • Protection category : IP 67
  • Rated volted : 600V DC/AC
  • Working temperature -25 to +80℃
  • Oilproof : yes
  • Weatherproof : yes
Salient features
  • Classification: OHM, OHM machine, OHM electric, OHM Distributor, OHM Electric Distributor, Quickcap, Quick cap, Liquidtight, junction box, Joibox, lineup
  • JB-W series CAPCON integrated, Standard (Cable gland and terminal board are integrated AC/DC300V 15A)
  • JB-W series Female threaded, 600V 20A rated (Female threaded entries allow a wide variety of connector selection for your particular wiring requirement, Rated voltage 600V 20A)
  • JB-W series Female threaded, Free box with 4-way entry (Unique 4-way entry allows the ultimate in flexibility for wiring and routing.Female threaded entries allow the selection of a variety connectors based on wiring requirements)
  • JB-W series Large & multi-purpose with hinged lid JB-WLQ100, JB-WLQ135, JB-WLQ220 (Offers increased efficiency for multi purpose large junction boxes, Opening and closing is done just by one screw)
Note
  • Protection category : IP 67
  • Certificates/Approvals : EU RoHS2
  • Working temperature -25 to +80℃
  • Oilproof : yes
  • Weatherproof : yes
Salient features
  • Classification: OHM, OHM electric, OHM Distributor, OHM Electric Distributor, Motor, detector, OMD-3, OMD-2
  • Detects voltage from three-phase induction motor. It electrically judges rotation and stop and outputs a signal.
  • It can be detected simply by connecting two wires to the motor.
  • Mounting method: DIN rail (35mm width) mounting
  • Rated voltage (50 / 60Hz): AC100V or 200V
  • Detection delay time: 0.2-1.5sec Variable depending on volume
Note
  • This detector is exclusively for AC200V three-phase induction motors. It cannot be used for single-phase commutator motors, etc.
  • Certificates/Approvals : RoHS2
  •  Working temperature 0 to +55℃
Salient features
  • Classification: NICHIFU, NCF, pin terminal, NICHIFU pin terminal,
  • The Pin stuck out center of terminal barrel to fit smoothly in narrower terminal block. Insulation cap (UL94V-0) for each Pin terminal are available.
  • Voltage : 600V/20A
  • Non-insulated Pin terminal & Non-insulation VC CAP: TC type
Note
  • Environmentally friendly insulated terminals: TMEX TC Type
Salient features
  • Classificaiton: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, extra long butts, sleeve.
  • Less distortion on Butt when crimped one side.
  • Easy and smooth installation.
  • Part number: B-type & P-type

Note

JIS, UL, CSA
NA 3, NA10, NA 20 air crimping tool.
NOH 300K (Head) requires hydraulic pump

Salient features
  • One touch and quick joint of indoor electrical wires.
  • Applicable wire size :  Copper/Solid wire φ1.6mm・φ2.0mm
  • Insulation maximum operating temperature:120℃
  • Rated:20A/300V
  • Part number: NPJ P01-3P, NPJ B01-3P, NPJ B02-3P, NPJ 3PV-S
Note
  • Material:

Plug Connector・Terminal Block:
Polycarbonate (Flame retardance UL94V-0)
VCTF-COVER:Polypropylene (transparent)
UNTI-DUST COVER:Silicon
CONTACT:Tin plated copper alloy

Salient features
  • Classification: NICHIFU, NICHIFU connector, NCF connector, NICHIFU cos, quick connector
  • QLX for solid copper wire. Translucent housing enables visual inspection of inserted wires.
  • QL MC for 0.9~1.2mm diameter solid copper wire.
  • QL SQ is a high temperature connector mainly for fire-detectors.
  • Part number:
QLX 2, QLX 3, QLX 4, QLX 5, QLX 6, QLX 8, QLXL 3 QLX SQ-2, QLX SQ-4, QLX MC-2, QLX MC-4  
Note

Material : Stainless Steel
Connector contact : Oxygen free copper (Tin plated)
Housing : Polycarbonate (UL94V2)