- Classification: OHM, OHM electric, OHM Distributor, OHM Electric Distributor, Motor, detector, OMD-3, OMD-2
- Detects voltage from three-phase induction motor. It electrically judges rotation and stop and outputs a signal.
- It can be detected simply by connecting two wires to the motor.
- Mounting method: DIN rail (35mm width) mounting
- Rated voltage (50 / 60Hz): AC100V or 200V
- Detection delay time: 0.2-1.5sec Variable depending on volume
Related products
Control Devices/FA Systems
3, 5-port pilot operated valve (4GA/BR・M4GA/BR・MN4GA/BR)_ CKD DISTRIBUTOR
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, COMPACT CYLINDER
- 【10mm width spacer pilot check valve added】 Cylinder braking and position holding are possible for long periods. (Cylinder bore size: up to ø32) Manual discharge of secondary residual pressure is possible.
- 【Reliability】 Superb main valve sliding mechanism realizes low sliding/long service life. Response time 12 ±2 ms (4G1 type) Durability count: 100 million times (single solenoid) Improved responsivity after shutdown.
- 【Environmental performance】Continuous energization is made possible by adopting a new coil actuator. Reduced power consumption is also achieved. (0.35 W, 0.1 W / low exoergic / energy type]
- 【Safety】Both metal base and resin block have internal exhaust check valve (model No. instruction) Prevents backflow of air at the time of exhaust, preventing cylinder malfunction.
Note
- 3, 5-port valve with improved environmental performance, safety, reliability, and ease of use. High-function.
[Cylinder bore size: φ20 to φ100]
Control Devices/FA Systems
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, NITROGEN, GAS EXTRACTION, NS・NSU
- [Improved flexibility in installation and design] Horizontal installation is now available. Improved ease of use, including installation in dead space and being built into equipment.
- [Expanded concentration range] The nitrogen concentration range is now available from 90%. It is easy to use for low nitrogen-containing applications.
- [Easy purification] Easily purifies nitrogen gas without using a cylinder or large equipment. Generates a nitrogen-enriched gas by utilizing a hollow fiber separation membrane that easily transmits oxygen.
- [More compact and convenient through 3 reductions] Reduced piping: Long piping work is unnecessary since it can be installed near equipment. Reduced processes / space: We propose the optimum system according to the required flow rate. Contributes to reduced procedures and space.
- [Easy maintenance] The cylinder does not need remaining amount management, replacement, or refilling. The only required maintenance cost is electricity for the air compressor. Component replacement is possible without disassembling the piping.
Note
- It easily separates and purifies the high-purity nitrogen necessary for oxidation-proof and explosion-proof applications from compressed air.
Horizontal installation is now available with the added flexibility in installation. Furthermore, a wide range of nitrogen concentration is available from 90% to 99.9%. The optimum model is selected from the 17 flow rates and 25 model lineup, and the nitrogen supply state can be constantly monitored with an inline oxygen sensor and flow meter.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, MOVER, ELECTRIC SHUTTLE MOVER
- [Space saving] 2D operation is realized without using multi-axis or gantry robots.
- Contributes to space saving with effective use of space. Supports long strokes of up to 20 m, inconceivable for conventional electric actuators.
- [Smooth operation realized] The servo motor drive enables freely adjustable setting of multipoint positioning speed. Smooth start / stop is realized.
- [Applicable to motors from all manufacturers] Mount a motor you're familiar with. Brackets compatible with all manufacturers' motors are available.
Note
- Transport system that enables single-axis 2D transport with one motor.
- Long stroke of up to 20 m. Multipoint positioning / Soft start & stop possible.
- This is a motorless specification.
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, MOTORLESS
- [Space-saving] A wide guide, “Outer Rail,” is used to support the load. In combination, the proper design of the slider part simultaneously achieves compact and high rigidity, and contributes to space.
- [Each Motor can be installed] A bracket is provided that matches the 12 servo motors and the three stepping motors. Combined with your own motors, it is available under familiar control. Each field network is supported.
- [Reduced installation time] The product can be installed directly from the top or bottom, without removing the cover. This significantly reduces work time, especially when installing from the top.
- [Low Dust Specification Option] Provides cleanness with class 2.5 equivalent (ISO14644-1 standards). Low dust generation is achieved by providing a vacuum port. Ideal for transport in clean environments. * For details on clean rating, refer to the catalog on pages for dust generation characteristics.
- [Easy Maintenance] A grease feed port capable of directly feeding grease from the outside is installed on the side of the slider. To maintain a guide and a ball screw by feeding fat from one place without disassembling a body.
Note
- [NEW] Added Low Dust Specification Option
- [NEW] Added Motor Manufacturer for Support
- A motorless specification of an electric actuator that allows you to install and control motors from each manufacturer.
- The Outer Rail System, which unifies the body and the guide, is compact and highly rigid. It has a grease supply port on the outside of the main body and is easy to install and maintain by enabling the top of the main body to be mounted.
- strokes: 50~1250mm
- Maximum portable mass (horizontal): 110kg
- Maximum speed: 1600mm/s
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, CKD VIETNAM, MN3E・MN4E, PLC, COMPATIBLE BLOCK MANIFOLD
- [Abundant communication support] Compatible with EtherNet / IP, EtherCAT, CC-Link, and DeviceNet. *November 2020, EtherNet/IP added.
- [Thin / space saving] MN3/4E00 Series is the thinnest at 7 mm, contributing to space saving. MN3/4E 0 series is a 10 mm high performance block manifold not only contributing to space saving, but also offering excellent responsiveness. (N3E0 Series two 3-port valves integrated type: A.B port both 12 ms)
- [Environmental conservation] Lighter weight and reduced material usage by downsizing / energy saving. We were among the earliest to reduce chemical substances affecting the environment, including lead-free solder and materials compatible with JIG-101A level A. With energy saving type (Option E), it further reduces power consumption.
- [Wide range of fitting variations] Inch size compatible with push-in fitting, ideal for use in the Western market. It also supports φ3 and φ1.8 tubes, contributing to space saving of piping.
- [Wide array of electrical connections] Serial transmission corresponding to various connectors and networks are available.
- [Pursuit of safety] Exhaust check valve, manual cover to prevent misoperation and air supply filter to prevent entry of foreign matter are provided as standard.
- Also supports individual wiring.
- Easily pluggable regulator blocks are also available.
Note
- More compact (39.5 mm high) and high-performance cassette 3, 4-port block manifold is also available.
Salient features
- Classification: Omron, Omron distributor, Omron industrial automation, Omron FA, Omron Vietnam, Omron EQUO Environment Sensor, EQUO Environment Sensor Omron, EQUO Environment Sensor, Robotics, Industrial Safety, Traceability, Vision, Sensors, IO-Link, Sensing, Relay
- Various sensors which can easily sense a particle at manufacturing site and environmental data of temperature/humidity and difference of pressure are lined up.
Note
- Air Flow Sensor
- Air Particle Sensor
- Thermo-Humidity Station, Illumination Sensor
- Differential Pressure Station
Salient features
- Classification: Omron, Omron distributor, Omron industrial automation, Omron FA, Omron Vietnam, Omron Industrial Robot, Industrial Robot Omron, Industrial Robot, Robotics, Industrial Safety, Traceability, Vision, Sensors, IO-Link, Sensing, Relay
- Robot arms, robot controllers, and vision systems for flexible production lines.
Note
- Parallel Robots
- SCARA Robots
- Articulated Robots
- Software
- Robot Controllers
Salient features
- Classification: CKD, CKD DISTRIBUTOR, CKD DISTRIBUTORS, RODLESS CYLINDER, SRL3
- [Flat cylinder] Piston is flat, with a structure allowing it to receive load. Highly load-resistant, with rotation-stop mechanism also provided.
- [Sealing belt] Seal part is straight, improving sealing performance.
- [High-speed packing] A piston packing for high speed operation has been adopted.
- [Common port] A common port (one-side piping) or standard port (both sides piping) can be selected according to the installation location. Downsizing of equipment realized.
- [Magnet provided as standard] Compatible with switch installation as standard.
Note
- Resistant to high load and durable.
High-speed rodless cylinder Series runs from φ12 to φ100 with a variety of choices.