High performance shielding braids
Raybraid and INSTALITE Lightweight Braid are high performance metallic oversleeves help provide excellent EMI shielding and lightning protection for wires and cable harness systems. The new INSTALITE Lightweight braid (LWB) offers a low cost way to save up to 50% weight over traditional braids.
Related products
- Classification: NICHIFU, NCF, NICHIFU VIETNAM, NICHIFU DISTRIBUTOR, ROMEX, CABLE SUPPORTER,
- Distributed wire suspension system prevents the danger of temperature rise and deterioration of cable insulation.
- Snap onto the suspension bolt with ease.
- Prevent temperature rise of wires and also deterioration of wire insulation. Easy fit on the suspension bolt
MATERIAL Polypropylene（UL94V-0）
INSULATOR TEMPERATURE -15℃〜 75℃
INSTALLATION TEMP 0℃〜 40℃
SUSPENSION BOLT W 3/8 bolt
- This cable is of a continuous structure in which the cores have bonded sections and un-bonded sections at constant intervals in the length direction (bonded section: 30mm/un-bonded section: 70mm). It is optimum for fixed wiring inside a case of complicated shape.
- We can also produce printed cables bearing the CSA or F mark to order.
- This product is environmentally friendly. The insulation does not contain specific bromide fire retardants (PBDE, PBB) or heavy metals such as Pb, Cr6+, Cd or Hg. In addition, the cable conforms to the RoHS standard (which restricts the use of specific toxic substances contained in electrical and electronic equipment).
Optimum for internal fixed wiring of computers peripheral equipment, communication equipment, office equipment, and so on.
Primary Product Material
Crosslinked Ethylene Tetrafluoroethylene
Crosslinked Fluoropolymer
Crosslinked Polyvinylidene Fluoride
- Classification: TE products, AMP products, TE connectors, TE Vietnam, Power Connectors TE
- Power connectors are engineered to reliably connect power, providing efficient supply and distribution in communications equipment using between 5 and 1,000 amps. Manufactured for DC- and AC-powered applications, these power connectors types offer many configurations: our RAPID LOCK connector is a single-pole, quick connect/disconnect replacement for lug connection; our MULTI-BEAM XL is a blind-mateable, highly versatile connector with high reliability and high current density.
CPC series: 1 cable or panel mount connector permit the use of multiple combinations of signal and coaxial circuits in the same housing by accepting durable Multimate contacts. From 4 thru 37 positions.
- Classification: TE products, AMP products, TE connectors, TE Vietnam, Rectangular Connectors TE.
- This type of device is engineered to optimize signal integrity in applications with limited internal space. Manufactured in materials ranging from molded plastics to die-cast alloys, our rectangular connector housings are engineered for reliable wire-to-wire and wire-to-board connections. Our portfolio offers different ratings and sizes, with or without locking features. Vertical headers are available with optional polarization pegs and drain holes and offer a blind mate version. Right angle headers offer optional screw mount flanges.
Grace Inertia connectors mate to simultaneously complete the circuit and lock the connector. There are four keying methods and colors available in the 3.3mm, 3.5mm, 6.0mm, 6.2mm, 6.5mm, 7.92mm, 9.0mm, and 12.4mm centerline options. These small wire-to-wire and wire-to-board connectors are used for a wide range of large electrical products such as home appliances, transportation solutions, air conditioners, vending machines, industrial controls, and HVAC systems.
- Classification: PANDUIT, PANDUIT DISTRIBUTOR, PANDUIT DISTRIBUTORS, PANDUIT VIETNAM, STAINLESS STEEL, CABLE CLEAT
- Protect against high short circuit fault requirements with a strap made of 316L stainless steel and compatible with a variety of cables.
- Material: 201 Stainless Steel
- Standards Met : IEC 61914:2015
S1048-TAPE-1X100-FT (EU RoHS Compliance, EU ELV Compliance)
- Classification: TE products, AMP products, TE connectors, TE Vietnam, Terminal Blocks & Strips TE
- Terminal blocks are insulated connections that fasten two or more wires together and have an insulating frame and a clamping system. Our broad portfolio of terminal blocks and barrier strips includes DIN Rail Terminal Blocks, Panel Mount Blocks, headers and receptacles. Our products come with a large set of ergonomic accessories. Our ranges are issued from known brands such as ENTRELEC and BUCHANAN.
Connector Mounting Type:
Board Mount
Cable Mount (Free-Hanging)
DIN Rail
Motor
Panel Mount