Shop
Salient features
High performance shielding braids
Raybraid and INSTALITE Lightweight Braid are high performance metallic oversleeves help provide excellent EMI shielding and lightning protection for wires and cable harness systems. The new INSTALITE Lightweight braid (LWB) offers a low cost way to save up to 50% weight over traditional braids.
Note
Cable Braid Product Type
Braid
Cable Protection Sleeves
Salient features
Reliable, Affordable Connection
These products are engineered to terminate wires and components to a printed circuit board (PCB). Our portfolio of tabs, pins, receptacles, and taps offer a reliable, cost-effective solution for attaching components with pin contacts to a printed circuit board. These products are held in place without solder, which means you can easily remove the component during replacement or repair. With our semiautomatic or automatic machines, you can quickly insert and securely clinch our receptacle contacts to the PCB.
Note
Terminal & Splice Type
Pin
Receptacle
Socket
Tab
Salient features
Ring terminals and spade lugs for reliable electrical connections
Ring terminals – known as lug terminals – are electrical terminals that join wiring to a stud or screw connection. On one end, ring terminals are equipped with a closed or open crimp barrel to make an electrical connection with the wire. On the other end is a ring-shaped tongue installed on equipment by a bolt or screw that goes through the ring. Spade terminals – known as spade lugs – join or disconnect a single wire that is connected to a screw or stud. Its shape, which resembles a fork or spade, allows the user to easily connect or disconnect the electrical connection. Spade terminals can help you to connect electrical wires quickly, because screws and bolts only require loosening – instead of complete disassembly – when attaching or removing a connection.
Note
Terminal & Splice Type
Flag Tongue
Hook Tongue
Lancelok
Multiple Stud
Offset Ring Tongue
Rectangular Tongue
Ring Tongue
Shur Plug
Slotted Ring Tongue
Spade Flange Tongue
Spade Tongue
Spark Plug
Splice
Spring Spade
Salient features
Whether you need to splice 30 AWG solid copper magnet wire or 4/0 stranded aluminum wire, our broad range of splices allow you to splice solid or stranded wire – with copper, aluminum, or a combination of both. We offer crimp, insulation displacement connection (IDC), and other wire splicing types technology, which you can apply manually or with semi- or fully-automated equipment. Engineered for reliability, our electrical wire splices provide you with a cost-effective solution for when you need to make millions of splices or a few repair splices.
Note
Splice Product Type
Accessory
Cable Joint
Cable Splice
Coaxial Cable Splice Kit
Contact
Wire Splice
Wire Terminator v.v
Salient features
TE manufactures Raychem adhesives and sealants in a variety of materials for use in a wide range of applications and environmental conditions. Raychem adhesives include thermosets, thermoplastics and mastic-tapes for water resistance in marine and buried cable applications.
Note
S1048-TAPE-1X100-FT (EU RoHS Compliance, EU ELV Compliance)
Salient features
Wiring protection for mil/aero applications
TE’s Raychem convoluted tubing is available in Helical HCTE and Annular Convolex styles to offer mechanical protection for electrical wiring systems in applications requiring flexibility and good resistance to a variety of fluids. Widely used in the military and commercial aerospace industries, Raychem Convolex tubing has an operating temperature range of -55 °C to 150°C, while the HCTE is rated higher to 200°C.
Note
Primary Product Material
Crosslinked Ethylene Tetrafluoroethylene
Crosslinked Fluoropolymer
Crosslinked Polyvinylidene Fluoride
Salient features
Using Heat Shrink Tubing
Heat shrink tubing provides electrical insulation, mechanical protection, environmental sealing, and strain relief for applications such as back-end connector sealing, breakouts, and connector-to-cable transitions. It is a solid alternative to taping, molding, or potting. When heated, our Raychem heat sleeves conforms to the size and shape of the substrate beneath, enabling quick and easy installation. Its high expansion ratio makes it possible to repair most damaged cable jackets without removing connectors. Available in a wide range of materials, colors, and sizes, heat shrink tubing is delivered in forms such as spools, 1.2m lengths, and cut pieces. Clear types permit inspection of covered components and offer excellent transmittance of light.
Note
Wall Material Type
Fiber & Fabric
Pre-Coated Tubing
Pre-Coated Wrap Jacket
Salient features
P-Clamps Enabling Next Generation Cable Assembly
TE Connectivity (TE) P-Clamps provide a light, fast, and efficient harness solution to cable mounting. Our ten TE P-Clamp sizes cover the full cable diameter range of 21 standard P-Clamp sizes. Faster install times and lighter weight give TE P-Clamps a lower applied cost than standard P-Clamps.
Note
Cable Mounting Accessory Type
Flexible Conduit Connector
P-Clamp
Salient features
Noise is reduced by adopting a DC motor
Noise is reduced by adopting a DC motor direct drive system. You can easily adjust the speed of the motor.
It also supports step movements with the jog button, improving workability such as checking the operation of the applicator and adjusting the terminal feed.
A wide range of compatible options, compatible with applicators made by other companies
A wide variety of options are available to support a wide variety of crimping operations. You can also replace the applicator quickly. It is compatible with applicators made by other companies and is easy to replace.
Prepare a safety cover
If the safety cover opens while driving, it will stop instantly. You cannot resume work until you close the safety cover.
Not only does it ensure the safety of workers, but it also prevents accidents caused by malfunctions during applicator replacement.
Other features
・ Crimping height can be adjusted in increments of 0.013 mm within a range of ± 0.25 mm
・Can be used at AC100 to 240V
・ A wide variety of options are available according to the work environment
Note
Salient features
It is possible to safely branch and consolidate the power supply line without using a round crimp terminal and with a resin cover.
Note
● Rated current value: 80A to 550A
Salient features
Super simple wiring!
No special tools required: Universal pliers can be used.
No need to strip the wire coating: Just cut the wire to the required length and install it as it is
Side-by-side wiring: Even one person can do the work of connecting the relay between the power source and the load.
Transparent body: You can visually check whether the wiring is correct or not.
Wide range of applicable wire: Applicable to single wire, tinned wire and braided wire size from 0.3 to 0.75 sq
Revolutionary waterproof structure
Simple: Revolutionary waterproof construction with silicone-based hydrophobic gel filled inside the connector
Submerged: IPX8 Compliant * * Cleared flood test at a depth of 1m / 2 hours
High weather resistance: UV resistance can be used outdoors (UV resistant plastic is also used for housing)”
Note
Salient features
A larger number of contacts can be mounted compared to a square connector of the same area.
Robust housing made of heat-resistant and autolytic thermoplastic resin enables use in harsh environments
Positive lock function ensures mating
Correspondence to environmentally hazardous substances: RoHS, REACH compliant
specification
Note
The following safety standards are approved for each model number. Please contact us for approval for each model number.
Please note that it may differ from the TE Connectivity performance specifications.